10 products
Air Components: J-200 Series - Hot Tub Store
Air Components: J-200 Series
from $2.19
J-200 Series Air Components (2005+) Compatible Models: J-275, J-245, J-235, J-210 (2012+) J-270, J-280 (2007+) J-230 (2008+) J-225, J-215 (2017+) 2540-281, Control: Air with Knob 6541-284, Manifold: Air Control Jacket 6541-282, Nut: Air Control (Not Shown) 6541-283, Gasket: Air Control (Not Shown)
Circuit Board: J-200 & J-100 LCD Series - Hot Tub Store
Circuit Board: J-200 & J-100 LCD Series
from $814.95
Circuit boards are available for sale for the J-200 and J-100 LCD Series Hot Tubs. Part numbers will vary depending on the hot tub model. Refer to the list below for the correct part number.  J-200 North American 60Hz Models (2018+) 6600-268, All 2018+ 1 & 2-Pump J-200 & J-100 Models (Microprocessor Based) J-200 LED Series (2014-2017) & J-100 LED Series (2016-2017) 6600-720, All 2014-2017 J-280, J-275, J-245, J-235 2-Pump Models, Micro Chip 5.60A Included 6600-722, All 2014-2017 J-210 and 2016-2017 J-225, J-215 1-Pump Models, Micro Chip 5.60A Included
Filter: 2540-381J for Jacuzzi 200 Series - Hot Tub Store
Filter: 2540-381J for Jacuzzi 200 Series
$116.55
Unsure which filter you need? Make finding the right filter easy with our simple filter finder tool!   Replacement filter cartridges are available for sale for the J-200 series models. Filter specifications are below:    ProClear 95 FT2  Filter Cartridge Designed for Performance REEMAY®  cartridge lasts up to 18 months Compatibility: J-230 series (2008-2012) J-270 series (2007+) J-280 series (2007+)
Heater: J-200 Series - Hot Tub Store
Heater: J-200 Series
from $231.95
J-200 Series All North America 60Hz Models without Circulation Pumps6500-412, Heater LED Models 240V/5.5kW (All J-385, J-375, J-365, J-355, J-345, J-335 Models.Heater 240V/5.5kW for 2013-2017 J-200 Models w/o Circ. Pumps (Nuts And Gaskets Included) 6500-085, Heater: 120V/1kW or 240V/4kW, 15" 825 Incoloy for 2018 to Oct 12, 2020 J-210, J-215, J-225 Convertible Models that have a pressure switch 6000-338, Heater: 120V/1kW or 240V/4kW, 15"?, for 2005-2017 J-210, J-215, J-225 Models (Nuts And Gaskets Included)
J-275/J-280 ProLast Extreme Cover - Hot Tub Store
J-275/J-280 ProLast Extreme Cover
$995.00
Need a Hot Tub Cover now? Check out our list of In-Stock Covers
Jet Assemblies J-200 Assemblies - Hot Tub Store
Jet Assemblies J-200 Assemblies
from $1.02
1. Classic Direct - 200s Jet (DX Jet) 2. Classic Euro - 200s Jet (DL Jet) 3. Classic Pulsator - 200s Jet (DV Jet) 1a. 2540-261, Jet Face: 200s Micro (DX Jet, Grey) 1b. 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2a. 2540-251, Jet Face: 200s Accu Pressure (DL Jet, Grey) 2b. 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 3a. 2540-241, Jet Face: 200s Pulsator (DV Jet, Grey) 3b. 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 4. 6541-612, Jet Back: 200s (Nut And O-Ring Included) 5. 6540-854, O-Ring: 200s 6. 6541-614, Washer: 200s (Self Leveling)
Jet Assemblies: Classic Whirl - ST Jet - Hot Tub Store
Jet Assemblies: Classic Whirl - ST Jet
from $2.95
Compatible with:  J-280 2014-2014 2540-531, Jet Face: 500s Rev.2 Whirlpool GPGY w/SS Escutcheon And Diffuser Face (Used 6/17/14+) 2540-529, Jet Face: 500s Whirlpool (ST Jet) w/SS Escutcheon 2B 2540-527, Jet Face: 500s Whirlpool (ST Jet) No Escutcheon (Grey) 6541-578, Jet Face: Classic PRO Turbo 6541-642, Jet Back: 500s (Nut And O-Ring Included) 6541-645, O-Ring: 500s 6541-644, Washer/Nut: 500s (Self Leveling) 6541-643, Nut: 500s Jet Back
Jet Assemblies: J-200 Series
Jet Assemblies: J-200 Series
from $0.57
Compatible with:  J-210 2012+ J-215 2016+ J-225 2016+ J-235 2014-2019 J-245 2014-2019 J-275 2014-2019 J-280 2014-2019 2540-261, Jet Face: 200s Micro (DX Jet, Grey)B 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 6541-576, Jet Face: Classic PRO Pulsating 6541-577, Jet Face: Classic PRO Accu Pressure 6541-612, Jet Back: 200s (Nut And O-Ring Included) 6540-854, O-Ring: 200s 6541-614, Washer: 200s (Self Leveling)
Low Flow Circulation Pump / Replacement Kit - Hot Tub Store
Low Flow Circulation Pump / Replacement Kit
from $0.37
Individual Circulation Pumps For J-300 Non-Convertible Spas (2002-2011)All J-280/J-270/J-230 Non-Convertible Spas with The Circ. Pump Option (2002-2011)   6000-125E (Laing) or 6000-125NA (Grundfos), Circulation Pump: E10, 240V 50/60Hz with Cord. This pump replaces retired 6000-125, 6500-035 pumps. 6500-460 (Laing)or 6500-460NA (Grundfos), Circulation Pump: E10, 120V with Chord. This pump replaced retired 6500-038 pump.     Note: The following parts are recommended when replacing a 6500-125 low-flow circulation pump. These products are also known as kit 6000-125RK (Grunfos pump + installation kit). They can be ordered as a kit or individually. Recommended quantities: 2x  27mm clamp (6570-033) 2x  #6 x 1" Flat Head Wood Screw (6570-100) 1x   3/4" Barb x Barb adapter (6541-075) 1x   3/4" Barb x Barb elbow (6540-228) 3x   3/4" Clear PVC Hose (sold by the foot for a total of 3') (6540-744)
Suction Fittings: J-200 Series - Hot Tub Store
Suction Fittings: J-200 Series
$8.95
J-200 Wall Suction Fitting (2005+) 6540-213, Filter: Spa Drain Cover; Note: Not Used After June 2008 6540-564, Grate: Suction 6540-565, Fitting: Wall  Suction (Nut and 6000-564 Screw Included) 6540-620, O-Ring: Compression (Replaced 6540-520 O-Ring) 6540-619, Washer: Self Leveling Suction Assy. 6000-564, Screw: 8-32 x 12mm, 316SS J-200 Filter Wall Fitting (2007+ J-280, J-270, J-230 Models) 6540-102, Wall Fitting, 2" (Gray) 6540-511, O-Ring: EDPM, 2.85" ID x 0.210" 6540-791, Nut, 2"

Fast FREE Shipping

on orders above $49*

Huge Inventory

on popular hot tub products

Great Customer Service

call or chat with our dedicated team
Visa Mastercard Shop Pay American Express Apple Pay Google Pay