ClearRay Replacement Bulb
$155.95
$203.79
The ClearRAY system uses UV-C technology to neutralize waterborne pathogens, rendering them useless. ClearRAY will also help reduce the amount of sanitizer you use in your hot tub, providing you with clean, fresh clear water.
For the cleanest, softest water possible. No more drying out, no more red-eye.
The ClearRay bulb needs to be replaced once a year. Detailed instructions on replacing your ClearRay bulb can be found here.
Replacement recommended every 12 months.
CLEARRAY® Parts
from $8.95
6000-374 - Compression Washer for Quartz Seal Nut
6472-841 - Replacement UV Sanitizer Bulb (Yearly Replacement Req'd)
6472-859 - Replacement UV Sanitizer Quartz Tube
6000-444 - Ballast: UV unit for 240V AMP *special order 6000-449 - Ballast: UV unit for 230V DSMT *special order
Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled.Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information.If a special order item is ordered with other non-special order items, it will delay the entire order.
Complete 120V ClearRay Units
$805.95
6472-728, 3rd Generation UV Unit, 120V 60Hz, AMP Connector, Fits all 2016+ J-300 Convertible models and 2018+ J-200/J-100 convertible models (North America)
6472-721, 3rd Generation UV Unit, 120V 60Hz, DSMT Connector, Fits all J-300 Convertible models 2015 and older, and J-200/J-100 convertible models 2017 and older (North America) Replaces all 1st and 2nd Generation 120V units.
Complete 230V ClearRay Units
$781.95
6472-722, 3rd Generation UV Unit, 240V 50/60Hz, AMP Connector, Fits all J-500, 2016+ J-400, 2016+ J-300 (240V), 2018+ J-200 (240V) and 2018+ J-100 (240V) Spas.
6472-726, 3rd Generation UV Unit, 240V 50/60Hz, DSMT Connector, Fits all 2015 and earlier J-400, 2015 and earlier J-300 (240V), 2017 and earlier J-200 (240V), and 2017 and earlier J-100, and all JLX series spas
Control Panel: J-200 LCD Series
from $312.95
Control panel parts are available for the J-200 Series. Review the specific part number that matches your models below.
J-200 LCD Series (2018+)
6600-229, 2018+ Panel: J-200 & J-100 1-Pump Models
6600-232, 2018+ Panel: J-200 & J-100 2-Pump Models
J-200 LED Series (2013-2017)
6600-501, 2013+ Panel: LED, All 2-Pump Models SMT
6600-500, 2013+ Panel: LED, All 1-Pump Models SMT
J-200 LED Series (2013-2017)
2600-322 (click here to be redirected), 2005-2006 Panel: LED, 2-pump (replaced 2600-302)
Control Panel: J-300 Series
from $234.95
J-300 LCD Series (2020+)
6600-489, Panel: LCD J-300 2020+ 2 pump with Bezel, encrypted.
6600-490, Panel: LCD J-300 2020+ 1 Pump with Bezel, encrypted.
J-300 LCD Series (06/2018-2019)
6600-382, Panel: J-300 1-Pump 06/2018+; Encrypted. Works with both 07/2018+ encrypted circuit boards, and 2016-06/2018 non-encrypted boards. Compatible with 2660-115 gasket shown below.
6600-383, Panel: J-300 2-Pump 06/2018+; Encrypted. Works with both 07/2018+ encrypted circuit boards, and 2016-06/2018 non-encrypted boards. Compatible with 2660-115 gasket shown below.
J-300 LCD Series (2016-05/2018)
6600-339, Panel: J-300 2-Pump 2016- 05/2018 (Not compatible with older models)
6600-341, Panel: J-300 1-Pump 2016- 05/2018 (Not compatible with older models)
J-300 LED Series (2007-2012)
2600-331, 2008-2012 Panel: LED, All 1-Pump Model
J-300 LED Series (2002-2006)
2600-322, *see compatibility below* Panel: LED, 2-Pump Model (replaced 2600-302)Compatibility: 2002-2006 J-345 & J-335; 2002-2003 J-340, 2005-2006 J-230
2600-323, *see compatibility below* Panel: LCD (replaced 2600-303)Compatibility: 2002-2006 J-350/J-355, J-360/J-365, J-370/J-375 & J-380/J-385
Control Panel: J-400 LCD Series
from $10.95
2019+ J-495, J-485, J-475, J-445, J-435 & 2020+ J-425 LCD Series
6600-509, Panel, LCD 2019+ J-495, J-485, J-475, J-445, J-435 & 2020+ J-425 with bezel, encrypted. Note: 2019 J-425 and J-415 use 6600-379, below.
6530-449, Jacuzzi Logo for panel (must be ordered with 6600-509)
J-400 LCD Series (04/2018-2018)
6600-379, Panel: LCD J-400 04/2018-2018 & 2019 J-415 & J-425; Peel And Stick Gasket Included. Encrypted. Works with both 04/2018+ encrypted circuit boards, and 09/2015-03/2018 non-encrypted boards.
J-400 LCD Series (Mid Dec 2009-2012)
6600-857, Mid Dec 2009-2011 Control Panel: LCD 1/3 VGA color graphics, 2-Pump. Replaced by the J-1000 conversion kit.
6600-405, 2012 Control Panel: LCD 1/3 VGA color graphics, 1-3 Pumps. Replaced by the J-1000 conversion kit.
J-400 LCD Series (2006-2009)
20318-001, Control Panel: 2 Pump (2006 - 2009).
2660-100, Underlay: LCD Panel
Control Panel: J-500 LCD Series
from $21.95
J-500 LCD Series (06/2018+)
6600-381, Panel: LCD J-500 06/2018+; Encrypted. Works with both 06/2018+ encrypted circuit boards, and 2015- 05/2018 non-encrypted boards.
J-500 LCD Series (2015-05/2018)
6600-348, Panel: LCD J-500 2017; with 8' Cable. Replaces 6600-347 and 6600-100.
6000-438, Gasket: J-500 Panel 3M 300LSE
Controllers J-400 Series
from $16.95
Please note: Some of the following parts may not be out of stock which may cause shipping delays.
2012-08/2015 J-400 Models
6600-400, J-1000 Controller: 240VAC/60Hz, 3-Pump J-495 Models; Replaces: 6600-401, 6600-305
*Requires J-400 Conversion Kit
Controller Chords J-400
6560-956, Harness: Topside Control Panel to Main Load Box
6560-161, Cord: Pump 1, 36" with DSMT plug
6560-169, Cord: Pump 2, 32" with DSMT plug
6560-151, Cord: Pump 3, 48" with DSMT plug (J-495 only)
6560-165, Cord: Circulation pump with DSMT plug
6560-193, Cord: Light, DSMT Plug to Mini-DIN (All 2013+ Models)
6560-173, Cord: Light, DSMT Plug (Mid 2009-2012 Models)
6560-098, Cord: Split, Step/Logo Light (2012+)
Cover for Jacuzzi Soul 110V
$699.00
Covers are custom ordered and ineligible for cancellation/return/refund. Need a Hot Tub Cover now? check out our list of In-Stock Covers.
Once the cover arrives to our warehouse, delivery must take place within 15 business days or storage fees may occur.
Cupholder Light
$116.95
Note: This product has been discontinued, however, we have some remaining stock.
6560-577, Light: LED Cup Holder with Ribbon connector
Compatible with:
J-495: 2012J-480: 2006-2012J-470: 2006-2011J-465: 2006-2012J-460: 2006-2012J-415: 2012
J-375: 2007-2012J-365: 2007-2012J-355: 2007-2012J-345: 2007-2012J-335: 2007-2012J-325: 2007-2012J-315: 2007-2012
Cupholder: J-400 Series
from $6.28
Used on All J-485, J-475, J-445, J-435 & 2020+ J-425, J-495 Models Only
J-445 & J-435 Models Only (10/2017-2018)
6541-175, Cupholder: 2017
6541-126, Gasket: Cup 1 Holder J-400
6541-139, Nut: Footwell Multicolor, 2007
6540-598, Cup Holder Plug: Keeps foam from contaminating illuminated cup holder.
J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435)
6541-173, LIMITED STOCK Cupholder Assy: Without Light, 2015 (Nut And Gasket Included)
Cupholder: Lighted Assembly, Complete 2014+
$119.95
Please Note:
*This item is sold only as a kit which includes all necessary seals and mounting hardware.
**This kit may no be in stock at the time of order, delays may occur. Contact us to verify availability.
6560-214