
Pillow: Jacuzzi J-200 Collection
from $5.51
$159.80
Jacuzzi J-200 Series pillows for all years and models.
Please note: pillows for older models may not be in stock at the time of ordering and shipping may be delayed.
6455-005, Receptacle: Pillow Socket, Snap-in
*6000-105, Washer: Sundance/Jacuzzi Pillow Cup
*Installed behind pillow socket cup. Used on 2008+ Dover; 2007+ 780 Hamilton, Chelsee, Certa, and Camden; 2007+ 680 Burlington, Hartford, Hawthorne, and Tacoma; All 2000-2002 SWEETWATER® Models.
Compatibility
2472-828
6455-468
6472-755*
J-280
All Years
-
-
J-275
2012+
-
-
J-270
All Years
-
-
J-245
2012+
-
-
J-235
2012+
-
-
J-230
2008+
2005-2007
-
J-225
-
-
2016+
J-220
-
2005-2007
-
J-215
-
-
2016+
* Replaces 2472-831

Temperature Sensors
from $55.95
Note: Some parts may not be in stock at the time of ordering and shipping may be delayed.
J-300 LED Display Models (2002-2015) J-200 Series (2005-2017), J-100 Series (2017 Only), Del Sol Series (All Years)
6600-166, Sensor: Temp Sensors with Curled Finger Connectors, 12' (3.7m)
J-400/J-1000 Series
6600-181, Sensor: Temp Sensors with DSMT Connector, 8' (2.4m) Cable
J-400 Series (2006-2009)
6600-167, Sensor: Temp Sensors with Box End Connectors, 12' (3.7m) Cable; Note: Also used in 2002-2003 J-350, J-360, J-370, J-380, 2004-2006 J-355, J-365, J-375, J-385, and all 2006-2009 J-400 models.
J-400 Series (2010-2015)
6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector), 37"(94cm) Cable
J-500 Series (2015+), J-400 Series (09/2015+), J-300 Series (2016+), J-200 Series (2018+), J-100 Series (2018+)
6600-751, Sensor: Assembly Water Temp, 3-Pin
O-RING for 6600-166 & 6600-167
6540-228
6600-551, Long-tip Water Temperature Sensor, 3-Pin connector, Glass Bead Thermistor. Can replace 6600-533.

Bracketless LX 56 Frame Pump Parts (5/2009+)
from $0.50
J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)
Compatible Pumps (LX Version; Not Emerson)
6500-352S
6500-365S
6500-367S
6500-363S
6500-845S
6500-090S
6500-357S
6500-232 Union Assembly, straight (o-ring included)
6500-037 Union Assembly, 45 degree (o-ring included)
6000-645 Union o-ring
6500-601 Screw, Self-Tapping (1 ea)
6500-602 Drain Plug
6500-603 Drain Plug O-Ring
6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030)
6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"
6500-604 Housing, Front (Volute) 56FR
6500-605 Housing O-Ring
6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors)
6500-281 Seal-Stationary ASM (PS200)
6500-606 Housing Rear 56FR
6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

Jet Assemblies: Classic Luxury DVX, PRO Duo Rotator & PRO Directional Jets
from $1.38
Compatible with:
J-210 2012+
2540-431, Jet Face: 400s Directional (DVX Jet, Grey)1B 2540-433, Jet Face: 400s Directional (DVX Jet, Stainless Steel)1C 2472-610, Jet Face: 400s Rotating - Not Shown (DVX Jet, Stainless Steel)1D 6541-574, Jet Face: Classic PRO Duo Rotator1E 6541-573, Jet Face: Classic PRO Directional
6541-632, Jet Back: 400s (Nut And O-Ring Included)
6541-635, O-Ring: 400s - Not available in Canada
6541-634, Washer/Nut: 400s (Self Leveling)
6541-633, Nut: 400s Jet Back

Bracketless Emerson 56 Frame Pump Parts (5/2009+)
from $3.00
Please note: These are the Emerson-made version of these pumps. The LX-made pumps are more common (click here for the LX-made versions). You can replace the LX-made pump with an Emerson pump. However, pump parts are not interchangeable. The label will indicate if it is LX or Emerson.
Universal Mounts are available for the J-LX, J-500, J-400, J-300, and J-100 Series hot tubs. Find the specifical hot tub parts and their specifications below:
J-LX/J-LXL/J-500/J-400/J-300/J-100 North America 60Hz
6500-352S Universal Bracket Mount, 1-Speed
6500-365 Universal Bracket Mount, 1-Speed
6500-367 Universal Bracket Mount, 2-Speed
6500-363 Universal Bracket Mount, 1-Speed
Pump Parts
Union Assembly, Straight (O- 6500-232 Ring Included)
Union Assembly, 45° 6500-037 (O-Ring Included)
Union O-Ring (1 ea.) 6000-645
Drain Plug with O-Ring (1 ea.) 6500-547
Screw, Self-Tapping (1 ea.) 6500-548
Housing, Front (Volute) 6500-546
Housing O-Ring 6500-545
Impeller, 2.5hp 6500-549
Seal-Plate, rotation 6500-544
Seal, ceramic, Stationary for North American 60Hz Pumps 6500-543
Rear housing 6500-541
Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel 6540-171 **Requires new o-ring 6540-263
O-Ring, 0.434" ID x 0.682" OD x 0.125" 6540-263
Run Capacitor 2.5hp (1&2 Speed Emerson Motors Only) 6000-163

Jet Assemblies: Classic Mini DXL & Mini Duo Rotator Jets
from $1.02
Note: These parts may not be in stock at time of order and may delay your shipment.
Classic Mini
2540-317, Jet Face: 300s Mini (Grey)1b. 2540-319, Jet Face: 300s Mini (Stainless Steel)1c. 6541-575, Jet Face: Classic PRO Mini Duo Rotator
6541-622, Jet Back: 300s (Nut And O-Ring Included)
6541-625, O-Ring: 300s - Not available in Canada
6541-624, Washer/Nut: 300s (Self Leveling)
6541-623, Nut: 300s Jet Back

Circuit Board: J-LX, J-300, J-200 (various years/models)
$645.95
Circuit board for Jacuzzi hot tubs:
J-LX: 2011+
J-300:
2012-2013: J-375, J-365, J-355, J-345, J-335
2008-2011: J-375
2007-2011: J-365, J-355, J-345, J-335
2005-2007: J-325
2002-2006: J-345, J-340, J-335, J-330
2002-2003: J-320
J-200 (only models with circulation pump):
2007-2012: J-280, J-270, J-230
mid-year 2007-2011: J-280, J-270
2005-2017: J-285, J-280, J275, J-270, J-235, J-245, J-230
Part Number Information:
6600-726 All 2004+ J-LX & J-LXL models, Micro Chip 3.61A Included
Replaces: 6600-088, 6600-288 and 6600-167 on all above models

Jet Assemblies: J-200 Series
from $0.57
Compatible with:
J-210 2012+
J-215 2016+
J-225 2016+
J-235 2014-2019
J-245 2014-2019
J-275 2014-2019
J-280 2014-2019
2540-261, Jet Face: 200s Micro (DX Jet, Grey)B 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel)
2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel)
2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless)
6541-576, Jet Face: Classic PRO Pulsating
6541-577, Jet Face: Classic PRO Accu Pressure
6541-612, Jet Back: 200s (Nut And O-Ring Included)
6540-854, O-Ring: 200s
6541-614, Washer: 200s (Self Leveling)

Diverter Valves: J-200 Series
from $0.87
J-280 Models (2007+)
2540-239, T-Valve: Cap And Knob
2540-274, T-Valve: Knob
2540-273, T-Valve: Cap
6541-241, O-Ring: Stem
6541-240, O-Ring: Body
6541-242, Gate Valve (T-Valve)
2540-275, Fitting: Wall T-Valve (6541-238 Nut Included)
6541-238, Nut: Diverter
6541-236, Body Assembly: T-Valve (Includes one each of items 4 through 6 above)
J-210 (2005+)
A 6541-800, Jet Face: Divert-A-Jet (Graphite Color for 2012+ J-210 Models) B 6540-800, Jet Face: Divert-A-Jet (Gray 2011 And Older Models)
6540-797, Wall Fitting: Divert-A-Jet
6540-511, O-Ring: Divert-A-Jet
6540-798, Nut: Divert-A-Jet
6540-796, Jet Back: Divert-A-Jet

Hi-Limit Sensors
from $20.95
Note: Not all hi-limit sensors may be in stock and delivery times may be delayed. Hi-limit sensors are non-refundable/non-returnable.
Use the chart below to determine which hi-limit sensors are compatible with your hot tub. Please note: all hi-limit sensors except 6600-168 are used for LED top-side controllers. If your J-300 series has an LCD controller, do not use an LED hi-limit sensor. Please contact or chat with us if you are unsure.
6600-140, Sensor: Hi-limit LED Series with Connector; Includes Curled Finger Contacts (32" cable)
6600-144, Sensor: Hi-limit LED Series without Connector; Includes Curled Finger Connectors (32" Cable)
6472-525, Harness: Hi-Limit LX 2-Pin (32" Cable)
6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector for J-1000) (37" Cable)
6600-110, Sensor: Hi-limit with Box End Connectors (90" Cable)
6600-129, Sensor: Hi-limit J-300/J-200 LED with Curled Finger Connectors
6600-168, Sensor: Hi-limit J-300/J-400 LCD with Box End Connectors
6000-093, Sensor: Hi-limit Disc ( All models)
6600-140
6600-144*
6472-525
6600-179
6600-110
6600-129**
6600-168 (LCD)
J-LX/J-LXL
2011+
2011+
J-500 Series (all)
2015+
J-400 Series (all)
Sept 2015+
2010-Aug 2015
2006-2009
2006-2009 LCD
J-300 Series (all)
2016+
2002+ LCD
J-310
2002-2003
2002-2003
J-315
2013-2016
2004-2017
2004-2015
J-320
2002-2003
J-325
2013-2016
2004-2017
2004 & 2008 & 2012-2015
J-330
2002-2003
J-335
2013-2016
2004-2017
J-340
2002-2003
J-345
2013-2016
2004-2017
J-350
2002-2003
2002-2003
J-355
2013-2016
2007-2017
2004-2006
2004-2006
J-360
2002-2003
2002-2003
J-365
2013-2016
2007-2017
2004-2006
2004-2006
J-370
2002-2003
2002-2003
J-375
2013-2016
2007-2017
2004-2006
2004-2006
J-380
2002-2003
2002-2003
J-385
2004-2006
2004-2006
J-200 Series (all)
2018+
J-210
2012-2017
2005-2017
J-220
2005-2017
J-230
2012-2017
2005-2017
J-235
2012-2017
2012-2017
J-245
2012-2017
2012-2017
J-270
2012-2017
2007-2017
J-275
2012-2017
2012-2017
J-280
2012-2017
2007-2017
J-100 Series (all)
2012-2017
2018+
Del Sol
All
*Can use 6600-140**Can use 6600-144

Waterfalls: J-300/J-200/J-100 Series
from $0.41
Waterfall Returns
J-LX, J-500, J-300, J-200, J-100 Series
6540-979, Drain: Gravity Drain with Cover 1-1/32"?
6540-682, O-Ring, 1.22" ID X 1 0.158" C/S (2 Req'd.)
6540-685, Nut, Accu- Pressure Jet
Waterfalls (J-200/J-100 Series)
6540-925, Cover: Waterfall Gray (Plastic)
6000-530, Cover: Waterfall (Stainless Steel)
6540-921, Fill Spout: Waterfall (Clear Plastic)
6541-285, Gasket: Waterfall
6570-121, Washer: Split Lock, 5/16" Stainless Steel (2 Req'd.)
6570-120, Bolt: Hex 1/4-20 x 1", Stainless Steel (2 Req'd.)
2540-004, Adapter: 3/4" Slip x FPT
6540-262, Adapter: 3/4" Spigot x 3/4" Barb

LED Perimeter Pin Lights
from $0.57
Compatibility:
06/2014+ 680 McKinley and Ramona
2013+ 680 Edison
2012+ 680 Peyton
1. 6560-581, Lens, Bullet 1"
2. 6541-433, Washer: .95 OD x .40 ID x .075 (replaced 6540 -368 8.31.20)
3. 6540-384, Nut: 3/8-16 Hex
4. 6541-000, O-Ring: .285"O.D. Replaces part number 6541-688 above
5. 6541-689, Nut: Compress Hex Dome
6541-647, Pin light with nut (limited stock)
6541-648, O-ring (limited stock)
6540-368, Washer: 0.9"O.D. x 0.4"I.D. x 0.075"(Silicone Rubber) (replaced by 6541-433)
6541-688, O-Ring: 5/16"O.D. (replaced by 6541-000)
6560-558, Light: LED Quad 36"x 38"Daisy (2012+ J-280, J-275, J-270, J-245, J-235 Models Only)

Low Flow Circulation Pump / Replacement Kit
from $0.37
Individual Circulation Pumps For J-300 Non-Convertible Spas (2002-2011)All J-280/J-270/J-230 Non-Convertible Spas with The Circ. Pump Option (2002-2011)
6000-125E (Laing) or 6000-125NA (Grundfos), Circulation Pump: E10, 240V 50/60Hz with Cord. This pump replaces retired 6000-125, 6500-035 pumps.
6500-460 (Laing)or 6500-460NA (Grundfos), Circulation Pump: E10, 120V with Chord. This pump replaced retired 6500-038 pump.
Note: The following parts are recommended when replacing a 6500-125 low-flow circulation pump. These products are also known as kit 6000-125RK (Grunfos pump + installation kit). They can be ordered as a kit or individually.
Recommended quantities:
2x 27mm clamp (6570-033)
2x #6 x 1" Flat Head Wood Screw (6570-100)
1x 3/4" Barb x Barb adapter (6541-075)
1x 3/4" Barb x Barb elbow (6540-228)
3x 3/4" Clear PVC Hose (sold by the foot for a total of 3') (6540-744)

J-300/J-200 Pump Replacement Parts (Prior to June 2009)
from $0.71
*Parts on this page may not be in stock and may be delayed for shipment
J-300/J-200 Fixed Bracket 48 Frame (60Hz) Pump Replacement Parts (Prior to June 2009)
6000-031, 2" Split nut6500-232, 2" Straight Union Assembly (includes 2" O-ring)6500-037, 2" 45° Union Assembly (includes 2" O-ring)6500-288, Front Housing for 2.5 hp (all years) and 2.0 hp (July 2003 - December 2009)6500-287, Font Housing for 2.0 hp (1999-June 2003) No longer available6540-171, 1/4-18 NSPM threadx 3/8"Barb, Stainless Steel Adapter (replaces 6540-030) Requires 1x 6540-171 O-ring (below)6540-263, O-ring (0.434" IDx 0.682" OD x 0.125" )6570-070, Self-tapping screw6500-255, Drain plug (1/4" NPSM)6500-256, Drain plug o-ring (0.47" ID x 0.103" )6500-290, Front Housing O-Ring6500-281, Seal (2.0hp 0.625" Shaft, PS200, 2002-June 2006) 6500-805, Seal (2.5hp 0.75" Shaft, PS201, all years) 6500-286, Rear bracket (2.0hp 1999-June 2003) No longer available6500-311, Rear bracket (2.0hp July 2003+, 2.5hp all years)Impellers6500-295, Impeller for 2.5hp (4.129" Diameter)6500-296, Impeller for 2.0hp (3.875" Diameter)6500-309, Impeller for 2.0hp (5.025" Diameter)6500-308, Impeller for 1.5hp (3.65" Diameter) No longer available
Compatibility:
6500-707 (2-Speed),
6500-753 (2-Speed),
6500-754 (2-Speed),
6500-758 (2-Speed),
6500-759 (2-Speed),
6500-761 (2-Speed),
6500-769 (1-Speed),
6500-763 (1-Speed)