Parts

The ClearRAY system uses UV-C technology to neutralize waterborne pathogens, rendering them useless. ClearRAY will also help reduce the amount of sanitizer you use in your hot tub, providing you with clean, fresh clear water. For the cleanest, softest water possible. No more drying out, no more red-eye.  The ClearRay bulb needs to be replaced once a year. Detailed instructions on replacing your ClearRay bulb can be found here.   Replacement recommended every 12 months. 

Replacement Jacuzzi J-300 Collection Pillow. Complete with pillow and pillow insert. For the insert & emblem parts only see here 2020 Massage Pillow Assembly (2472-136): Massage ("Hydrosoothe") Pillow complete assembly for 2020 J-300 series.Contains the following items: 6541-336: Inner Ring: Pillow, Massage, J-300 2020 6541-361: Outer Ring: Pillow, Massage, J-300 2020 6541-403: Bushing: Pillow, J-300 2020 x2 6540-547: Nut: .5-13 Nylon Wing x2 2020+ Massage Pillow Fr Assembly (2472-014): Massage ("Hydrosoothe") Pillow complete assembly for 2020+ J-300 series.Contains the following items: 6455-036: Pillow, Massage, J-300 6541-427: Pillow, Inner Ring FR 6541-428: Pillow, Outer Ring FR 6541-430: Pillow, Snap FR x2 6541-429: Pillow, Threaded Stud x2 6541-432: Gasket x2 6540-547: Nut, 5-13 Nylon Wing x2

Jacuzzi Brand Pillow for J-400 Collection   Jacuzzi pillows for the J-400 collection (all years, all models). Please note that pillows do not include mounting hardware or sliders.   2570-401, Slider: J-400 Series Pillows (for 2472-820 and 2472-822) 2000-263, Oval Pillow Insert, Logo (Emblem)   J400 pillow compatibility by year:  Model Pillow:6455-031 Pillow:2472-820*" DOES NOT INCLUDE SLIDER Pillow:2472-822* DOES NOT INCLUDE SLIDER J-495 2020+ 2012-2019 -- J-485 2019+ -- -- J-480 -- mid 2009-2018 2006-mid 2009 J-475 2019+ -- -- J-470 -- mid 2009-2018 2006-mid 2009 J-465 -- mid 2009-2017 2007-mid 2009 J-460 mid 2009-2012 2006-mid 2009 J-445 Oct 2017+ -- -- J-435 Oct 2017+ -- -- J-425 2020+ mid 2009-2019 -- J-415 -- mid 2009-2019 -- *Slider (2570-401) is required for 2472-820 and 2472-822 " Jacuzzi emblem available for pillow 2472-820

J-LX & J-LXL Series (2011+) Assembly Used on 2020+ J-425 & J-495, 2019+ J-485 & J-475 and 10/2017+ J-445 & J-435 6540-439, Knob: Diverter J-445, 2017 6540-455 Nut: Diverter J-400 (Grey) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D. 6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately) 6541-014, Fitting: Wall T-Valve J-400 (Clear) 6560-320, Light ring: Diverter Top HT This item is not stocked and made to order. Final sale (not eligible for a refund). 6560-312, Nut: J400 (Clear) 6540-560 (2/16/18+), Body: T-Valve 2018  Assembly Used on All other 2016+ J-400 Models 2540-533, Knob: Diverter (2007+ J-400/J-300) 20090-001, Knob: Diverter (2006 J-400 Series) 6540-729, Cap: Diverter (All 2002+ Models) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D.  6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967 

Jacuzzi J-200 Series pillows for all years and models. Please note: pillows for older models may not be in stock at the time of ordering and shipping may be delayed. 6455-005, Receptacle: Pillow Socket, Snap-in 6000-105*, Washer: Sundance/Jacuzzi Pillow Cup *Installed behind pillow socket cup. Used on 2008+ Dover; 2007+ 780 Hamilton, Chelsee, Certa, and Camden; 2007+ 680 Burlington, Hartford, Hawthorne, and Tacoma; All 2000-2002 SWEETWATER® Models. 6541-687, Grommet (2 per pillow) for pillow 2472-015 (early 2023+ J-200 models), requires 6540-547 6540-547, Nut (2 per pillow) for pillow 2472-015 (early 2023+ J-200 models)   Compatibility  2472-828 6455-468 6472-755* 2472-015 J-285 - - - early 2023 J-280 All Years - - - J-275 2012+ - - early 2023 J-270 All Years - - - J-245 2012+ - - early 2023 J-235 2012+ - - early 2023 J-230 2008+ 2005-2007 - - J-225 - - 2016+ early 2023 J-220 - 2005-2007 - - J-215 - - 2016+ early 2023  * Replaces 2472-831

Note: Some parts may not be in stock at the time of ordering and shipping may be delayed. J-300 LED Display Models (2002-2015) J-200 Series (2005-2017), J-100 Series (2017 Only), Del Sol Series (All Years)  6600-166, Sensor: Temp Sensors with Curled Finger Connectors, 12' (3.7m)  J-400/J-1000 Series 6600-181, Sensor: Temp Sensors with DSMT Connector, 8' (2.4m) Cable J-400 Series (2006-2009) 6600-167, Sensor: Temp Sensors with Box End Connectors, 12' (3.7m) Cable; Note: Also used in 2002-2003 J-350, J-360, J-370, J-380, 2004-2006 J-355, J-365, J-375, J-385, and all 2006-2009 J-400 models. J-400 Series (2010-2015) 6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector), 37"(94cm) Cable J-500 Series (2015+), J-400 Series (09/2015+), J-300 Series (2016+), J-200 Series (2018+), J-100 Series (2018+) 6600-751, Sensor: Assembly Water Temp, 3-Pin O-RING for 6600-166 & 6600-167 6540-228   6600-551, Long-tip Water Temperature Sensor, 3-Pin connector, Glass Bead Thermistor. Can replace 6600-533.  

J-300 Models 2020+ 6541-344, Knob: Diverter, J-300 2020 6540-434, Nut: Diverter HT 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D. 6540-550, O-Ring: Diverter Gate, 2.175 I.D.  6540-568, Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560, Body: T-Valve 2018  Assembly Used on All other 2016+ J-300 Models 2540-533, Knob: Diverter (2007+ J-400/J-300) 20090-001, Knob: Diverter (2006 J-400 Series) 6540-729, Cap: Diverter (All 2002+ Models) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D.  6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967 

Has your cover lifter become damaged or ruined? We have replacement parts that can restore your cover lifter and have it working properly agian. Individual part information and descriptions are below:  Pivot Arm - Length: 26"; Direct replacement for the original bar on the CoverMate I - Part # 100004 Extended Pivot Arm - Length: 33"; Direct replacement for extended arm on the CoverMate I - Part # 100591 Support Arm - Direct replacement for support arm on the CoverMate I Coupler - Direct replacement for coupler on the CoverMate I and CoverMate 3 Plastic Bracket Kit - The Bracket Kit includes the Plastic Left & Right Brackets, and Screw Kit. Plastic Bracket - This is the replacement plastic bracket - Part # 100021 Plastic Screw Kit - All the screws, bolts and plastic screw caps to completely replace broken or misplaced parts you may need on your CoverMate 1 cover lifter.  Foam Grip - Part # 100002  

J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)   Compatible Pumps (LX Version; Not Emerson) 6500-352S 6500-365S 6500-367S 6500-363S 6500-845S 6500-090S 6500-357S   6500-232 Union Assembly, straight (o-ring included) 6500-037 Union Assembly, 45 degree (o-ring included) 6000-645 Union o-ring 6500-601 Screw, Self-Tapping (1 ea) 6500-602 Drain Plug 6500-603 Drain Plug O-Ring 6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030) 6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"  6500-604 Housing, Front (Volute) 56FR 6500-605 Housing O-Ring 6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors) 6500-281 Seal-Stationary ASM (PS200) 6500-606 Housing Rear 56FR 6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

Has your cover lifter from Cover Mate become damaged or ruined? We have replacement parts that can restore your cover lifter and have it working properly again. Individual part information and descriptions are below:  Pivot Arm - This arm is 31"and is a direct replacement of your original bar. The pivot arm is the bar that connects the cover lifter to the bracket mounted to the hot tub. 38" Extended Pivot Arm for CoverMate III 48" Extended Pivot Arm for CoverMate III Right and Left Support Bar - direct replacement of the original right or left arm Coupler - direct replacement of the original coupler Plastic Screw Kit - has all the screws, bolts, and plastic screw caps you need completely replace currently broken or misplaced parts.  Left and Right Plastic Bracket - direct replacement of the original bracket DeckMount L Bracket - Bracket kit is used to mount the Leisure Concepts CoverMate III cover lifter to your deck Small Black Dome Caps - Package of 50

J-300 Series 2016+ 6560-905, 2016+ Waterfall (12VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket purchased separately below. 6541-068, 2014+ Waterfall Cover; 2540-906, Gasket: Waterfall 2560-904, Nut: Waterfall 2014/2015 6560-125 2014-2015 Waterfall (15VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket Purchased Separately Below. 6541-068, 2014+ Waterfall Cover; 2540-906, Gasket: Waterfall 2560-904, Nut: Waterfall 2007-2012 2540-904, Waterfall: Complete Kit (no longer available) 2540-905, Waterfall cover (no longer available) 2540-906, Waterfall gasket 2560-904, Waterfall nut

1. Classic Direct - 200s Jet (DX Jet) 2. Classic Euro - 200s Jet (DL Jet) 3. Classic Pulsator - 200s Jet (DV Jet) 1a. 2540-261, Jet Face: 200s Micro (DX Jet, Grey) 1b. 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2a. 2540-251, Jet Face: 200s Accu Pressure (DL Jet, Grey) 2b. 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 3a. 2540-241, Jet Face: 200s Pulsator (DV Jet, Grey) 3b. 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 4. 6541-612, Jet Back: 200s (Nut And O-Ring Included) 5. 6540-854, O-Ring: 200s 6. 6541-614, Washer: 200s (Self Leveling)