ClearRay Replacement Bulb
$155.95
$203.79
The ClearRAY system uses UV-C technology to neutralize waterborne pathogens, rendering them useless. ClearRAY will also help reduce the amount of sanitizer you use in your hot tub, providing you with clean, fresh clear water.
For the cleanest, softest water possible. No more drying out, no more red-eye.
The ClearRay bulb needs to be replaced once a year. Detailed instructions on replacing your ClearRay bulb can be found here.
Replacement recommended every 12 months.
Pillow: Jacuzzi J-300 Collection
from $54.95
$259.80
Replacement Jacuzzi J-300 Collection Pillow.
Complete with pillow and pillow insert.
For the insert & emblem parts only see here
2020 Massage Pillow Assembly (2472-136): Massage ("Hydrosoothe") Pillow complete assembly for 2020 J-300 series.Contains the following items:
6541-336: Inner Ring: Pillow, Massage, J-300 2020
6541-361: Outer Ring: Pillow, Massage, J-300 2020
6541-403: Bushing: Pillow, J-300 2020 x2
6540-547: Nut: .5-13 Nylon Wing x2
2020+ Massage Pillow Fr Assembly (2472-014): Massage ("Hydrosoothe") Pillow complete assembly for 2020+ J-300 series.Contains the following items:
6455-036: Pillow, Massage, J-300
6541-427: Pillow, Inner Ring FR
6541-428: Pillow, Outer Ring FR
6541-430: Pillow, Snap FR x2
6541-429: Pillow, Threaded Stud x2
6541-432: Gasket x2
6540-547: Nut, 5-13 Nylon Wing x2
Pillow: Jacuzzi J-400 Collection
from $10.95
$259.80
Jacuzzi Brand Pillow for J-400 Collection
Jacuzzi pillows for the J-400 collection (all years, all models). Please note that pillows do not include mounting hardware or sliders.
2570-401, Slider: J-400 Series Pillows (for 2472-820 and 2472-822)
2000-263, Oval Pillow Insert, Logo (Emblem)
J400 pillow compatibility by year:
Model
Pillow:6455-031
Pillow:2472-820*" DOES NOT INCLUDE SLIDER
Pillow:2472-822* DOES NOT INCLUDE SLIDER
J-495
2020+
2012-2019
--
J-485
2019+
--
--
J-480
--
mid 2009-2018
2006-mid 2009
J-475
2019+
--
--
J-470
--
mid 2009-2018
2006-mid 2009
J-465
--
mid 2009-2017
2007-mid 2009
J-460
mid 2009-2012
2006-mid 2009
J-445
Oct 2017+
--
--
J-435
Oct 2017+
--
--
J-425
2020+
mid 2009-2019
--
J-415
--
mid 2009-2019
--
*Slider (2570-401) is required for 2472-820 and 2472-822
" Jacuzzi emblem available for pillow 2472-820
Diverter Valves: J-400 Series
from $0.81
J-LX & J-LXL Series (2011+)
Assembly Used on 2020+ J-425 & J-495, 2019+ J-485 & J-475 and 10/2017+ J-445 & J-435
6540-439, Knob: Diverter J-445, 2017
6540-455 Nut: Diverter J-400 (Grey)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately)
6541-014, Fitting: Wall T-Valve J-400 (Clear)
6560-320, Light ring: Diverter Top HT This item is not stocked and made to order. Final sale (not eligible for a refund).
6560-312, Nut: J400 (Clear)
6540-560 (2/16/18+), Body: T-Valve 2018
Assembly Used on All other 2016+ J-400 Models
2540-533, Knob: Diverter (2007+ J-400/J-300)
20090-001, Knob: Diverter (2006 J-400 Series)
6540-729, Cap: Diverter (All 2002+ Models)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018
6541-969, Fitting: Wall Diverter
6540-968, Nut: Diverter
6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967
Pillow: Jacuzzi J-200 Collection
from $5.51
$159.80
Jacuzzi J-200 Series pillows for all years and models.
Please note: pillows for older models may not be in stock at the time of ordering and shipping may be delayed.
6455-005, Receptacle: Pillow Socket, Snap-in
6000-105*, Washer: Sundance/Jacuzzi Pillow Cup *Installed behind pillow socket cup. Used on 2008+ Dover; 2007+ 780 Hamilton, Chelsee, Certa, and Camden; 2007+ 680 Burlington, Hartford, Hawthorne, and Tacoma; All 2000-2002 SWEETWATER® Models.
6541-687, Grommet (2 per pillow) for pillow 2472-015 (early 2023+ J-200 models), requires 6540-547
6540-547, Nut (2 per pillow) for pillow 2472-015 (early 2023+ J-200 models)
Compatibility
2472-828
6455-468
6472-755*
2472-015
J-285
-
-
-
early 2023
J-280
All Years
-
-
-
J-275
2012+
-
-
early 2023
J-270
All Years
-
-
-
J-245
2012+
-
-
early 2023
J-235
2012+
-
-
early 2023
J-230
2008+
2005-2007
-
-
J-225
-
-
2016+
early 2023
J-220
-
2005-2007
-
-
J-215
-
-
2016+
early 2023
* Replaces 2472-831
Temperature Sensors
from $55.95
Note: Some parts may not be in stock at the time of ordering and shipping may be delayed.
J-300 LED Display Models (2002-2015) J-200 Series (2005-2017), J-100 Series (2017 Only), Del Sol Series (All Years)
6600-166, Sensor: Temp Sensors with Curled Finger Connectors, 12' (3.7m)
J-400/J-1000 Series
6600-181, Sensor: Temp Sensors with DSMT Connector, 8' (2.4m) Cable
J-400 Series (2006-2009)
6600-167, Sensor: Temp Sensors with Box End Connectors, 12' (3.7m) Cable; Note: Also used in 2002-2003 J-350, J-360, J-370, J-380, 2004-2006 J-355, J-365, J-375, J-385, and all 2006-2009 J-400 models.
J-400 Series (2010-2015)
6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector), 37"(94cm) Cable
J-500 Series (2015+), J-400 Series (09/2015+), J-300 Series (2016+), J-200 Series (2018+), J-100 Series (2018+)
6600-751, Sensor: Assembly Water Temp, 3-Pin
O-RING for 6600-166 & 6600-167
6540-228
6600-551, Long-tip Water Temperature Sensor, 3-Pin connector, Glass Bead Thermistor. Can replace 6600-533.
Diverter Valves: J-300 Series
from $12.95
J-300 Models 2020+
6541-344, Knob: Diverter, J-300 2020
6540-434, Nut: Diverter HT
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568, Gate: T-Valve, 2018
6541-969, Fitting: Wall Diverter
6540-968, Nut: Diverter
6540-560, Body: T-Valve 2018
Assembly Used on All other 2016+ J-300 Models
2540-533, Knob: Diverter (2007+ J-400/J-300)
20090-001, Knob: Diverter (2006 J-400 Series)
6540-729, Cap: Diverter (All 2002+ Models)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018
6541-969, Fitting: Wall Diverter
6540-968, Nut: Diverter
6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967
Bracketless LX 56 Frame Pump Parts (5/2009+)
from $0.50
J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)
Compatible Pumps (LX Version; Not Emerson)
6500-352S
6500-365S
6500-367S
6500-363S
6500-845S
6500-090S
6500-357S
6500-232 Union Assembly, straight (o-ring included)
6500-037 Union Assembly, 45 degree (o-ring included)
6000-645 Union o-ring
6500-601 Screw, Self-Tapping (1 ea)
6500-602 Drain Plug
6500-603 Drain Plug O-Ring
6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030)
6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"
6500-604 Housing, Front (Volute) 56FR
6500-605 Housing O-Ring
6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors)
6500-281 Seal-Stationary ASM (PS200)
6500-606 Housing Rear 56FR
6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)
Waterfall: J-300 Series
from $2.03
J-300 Series
2016+
6560-905, 2016+ Waterfall (12VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket purchased separately below.
6541-068, 2014+ Waterfall Cover;
2540-906, Gasket: Waterfall
2560-904, Nut: Waterfall
2014/2015
6560-125 2014-2015 Waterfall (15VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket Purchased Separately Below.
6541-068, 2014+ Waterfall Cover;
2540-906, Gasket: Waterfall
2560-904, Nut: Waterfall
2007-2012
2540-904, Waterfall: Complete Kit (no longer available)
2540-905, Waterfall cover (no longer available)
2540-906, Waterfall gasket
2560-904, Waterfall nut
Jet Assemblies J-200 Assemblies
from $1.02
1. Classic Direct - 200s Jet (DX Jet)
2. Classic Euro - 200s Jet (DL Jet)
3. Classic Pulsator - 200s Jet (DV Jet)
1a. 2540-261, Jet Face: 200s Micro (DX Jet, Grey)
1b. 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel)
2a. 2540-251, Jet Face: 200s Accu Pressure (DL Jet, Grey)
2b. 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel)
3a. 2540-241, Jet Face: 200s Pulsator (DV Jet, Grey)
3b. 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless)
4. 6541-612, Jet Back: 200s (Nut And O-Ring Included)
5. 6540-854, O-Ring: 200s
6. 6541-614, Washer: 200s (Self Leveling)
Flow Switches
from $88.95
J-400/J-1000 Series (2010-08/2015)
6560-651, Switch: Flow Switch Assembly with 5' (1.5m) Cable, DSMT; Note: For J-400/J-1000 Systems Only
J-LX & J-LXL (2011+), J-500 Series (2015+), J-400 (09/2015+), J-300 Convertible Models (2016+)
2560-040, Switch: Flow Vert Heater with a Curled finger connectors
J-400 Series (2006-2009)
6560-646, Switch: Flow Switch Assembly with 5' (1.5m) Cable And Box End Connectors
J-300: Oval Pillow Insert and Emblem
from $32.95
This is for the pillow insert & emblem parts only - the full pillows can be found here
Oval pillow insert and emblem for J-300 series hot tubs.
6455-488: Years 2014+
2455-104: Years 2007-2013
6455-007: Years 2004-2006
You can find your Jacuzzi serial number, model and model year on the product tag often found inside the main equipment bay. On older tubs it may be found on the spa pack, the frame, or sometimes on the floor behind the back cabinet panel. More information can be found here: Where to find my Jacuzzi Serial number.
Jet Assemblies: PowerPro FX2-S Spinner Jet (2/2014+)
from $2.63
Compatible with:
J-LX/LXL Series 2015-2019
J-315 2016+
J-325 2016+
J-355 2014+
J-345 2014+
J-355 2014+
J-365 2014+
J-375 2014+
J-385 2016+
J-415 2014-2019
J-425 2016-2019
J-435 2018+
J-445 2018+
J-465 2016-2017
J-470 2016-2018
J-475 2019+
J-480 2016-2018
J-485 2019+
J-495 2016+
J-575/585 2015+
6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon
6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included)
6541-644, Washer: 500s (Self Leveling)
Air Components: J-300 / J-LX Series
from $0.37
Air control valves are available for sale for the J-LX hot tub and the J-LXL hot tub. Individual air control components and their specifications are listed below:
J-LX & J-LXL Air Control Valve (2011+) J-300 Air Control Valve (2007+)
6541-142, Control: Air Toggle Switch
6541-143, Gasket: Toggle Outer Shell
6541-144, O-Ring: Toggle Inner Shell
6540-375, Manifold: Air Control Jacket
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-300 Air Control Valve (2002-2006)
Air control valves are available for sale for the J-300 Hot Tub Series. Individual air control components and their specifications are listed below:
6540-914, Control: Air Push Button
6540-913, Gasket: Push Button Air Control
6540-522, O-Ring: Push Button Air Control
6540-912, Manifold: Push Button Air Control
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-LX/J-LXL Air Bleed Line Fitting (2011+) J-300 Air Bleed Line Fitting (2005+)
6540-252, Nut: Air Injector
6540-228, O-Ring: EPDM 0.662" ID x 0.210"
6541-263, Injector: Air PVC Gray
Knob:T-valve JHT
from $6.61
Diverter Valve Knob
2540-533, Knob: T-Valve
Compatibility:
J-LX/J-LXL: 2007+
J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+)
J-300: 2007+
6540-728, Knob: T-Valve
Compatibility:
J-300: 2002-2006