
Pillow: Jacuzzi J-300 Collection
from $54.95
$259.80
Replacement Jacuzzi J-300 Collection Pillow.
Complete with pillow and pillow insert.
For the insert & emblem parts only see here
2020 Massage Pillow Assembly (2472-136): Massage ("Hydrosoothe") Pillow complete assembly for 2020 J-300 series.Contains the following items:
6541-336: Inner Ring: Pillow, Massage, J-300 2020
6541-361: Outer Ring: Pillow, Massage, J-300 2020
6541-403: Bushing: Pillow, J-300 2020 x2
6540-547: Nut: .5-13 Nylon Wing x2
2020+ Massage Pillow Fr Assembly (2472-014): Massage ("Hydrosoothe") Pillow complete assembly for 2020+ J-300 series.Contains the following items:
6455-036: Pillow, Massage, J-300
6541-427: Pillow, Inner Ring FR
6541-428: Pillow, Outer Ring FR
6541-430: Pillow, Snap FR x2
6541-429: Pillow, Threaded Stud x2
6541-432: Gasket x2
6540-547: Nut, 5-13 Nylon Wing x2

Temperature Sensors
from $55.95
Note: Some parts may not be in stock at the time of ordering and shipping may be delayed.
J-300 LED Display Models (2002-2015) J-200 Series (2005-2017), J-100 Series (2017 Only), Del Sol Series (All Years)
6600-166, Sensor: Temp Sensors with Curled Finger Connectors, 12' (3.7m)
J-400/J-1000 Series
6600-181, Sensor: Temp Sensors with DSMT Connector, 8' (2.4m) Cable
J-400 Series (2006-2009)
6600-167, Sensor: Temp Sensors with Box End Connectors, 12' (3.7m) Cable; Note: Also used in 2002-2003 J-350, J-360, J-370, J-380, 2004-2006 J-355, J-365, J-375, J-385, and all 2006-2009 J-400 models.
J-400 Series (2010-2015)
6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector), 37"(94cm) Cable
J-500 Series (2015+), J-400 Series (09/2015+), J-300 Series (2016+), J-200 Series (2018+), J-100 Series (2018+)
6600-751, Sensor: Assembly Water Temp, 3-Pin
O-RING for 6600-166 & 6600-167
6540-228
6600-551, Long-tip Water Temperature Sensor, 3-Pin connector, Glass Bead Thermistor. Can replace 6600-533.

Diverter Valves: J-300 Series
from $12.95
J-300 Models 2020+
6541-344, Knob: Diverter, J-300 2020
6540-434, Nut: Diverter HT
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568, Gate: T-Valve, 2018
6541-969, Fitting: Wall Diverter
6540-968, Nut: Diverter
6540-560, Body: T-Valve 2018
Assembly Used on All other 2016+ J-300 Models
2540-533, Knob: Diverter (2007+ J-400/J-300)
20090-001, Knob: Diverter (2006 J-400 Series)
6540-729, Cap: Diverter (All 2002+ Models)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018
6541-969, Fitting: Wall Diverter
6540-968, Nut: Diverter
6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967

Bracketless LX 56 Frame Pump Parts (5/2009+)
from $0.50
J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)
Compatible Pumps (LX Version; Not Emerson)
6500-352S
6500-365S
6500-367S
6500-363S
6500-845S
6500-090S
6500-357S
6500-232 Union Assembly, straight (o-ring included)
6500-037 Union Assembly, 45 degree (o-ring included)
6000-645 Union o-ring
6500-601 Screw, Self-Tapping (1 ea)
6500-602 Drain Plug
6500-603 Drain Plug O-Ring
6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030)
6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"
6500-604 Housing, Front (Volute) 56FR
6500-605 Housing O-Ring
6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors)
6500-281 Seal-Stationary ASM (PS200)
6500-606 Housing Rear 56FR
6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

J-300: Oval Pillow Insert and Emblem
from $32.95
This is for the pillow insert & emblem parts only - the full pillows can be found here
Oval pillow insert and emblem for J-300 series hot tubs.
6455-488: Years 2014+
2455-104: Years 2007-2013
6455-007: Years 2004-2006
You can find your Jacuzzi serial number, model and model year on the product tag often found inside the main equipment bay. On older tubs it may be found on the spa pack, the frame, or sometimes on the floor behind the back cabinet panel. More information can be found here: Where to find my Jacuzzi Serial number.

Jet Assemblies: PowerPro FX2-S Spinner Jet (2/2014+)
from $2.63
Compatible with:
J-LX/LXL Series 2015-2019
J-315 2016+
J-325 2016+
J-355 2014+
J-345 2014+
J-355 2014+
J-365 2014+
J-375 2014+
J-385 2016+
J-415 2014-2019
J-425 2016-2019
J-435 2018+
J-445 2018+
J-465 2016-2017
J-470 2016-2018
J-475 2019+
J-480 2016-2018
J-485 2019+
J-495 2016+
J-575/585 2015+
6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon
6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included)
6541-644, Washer: 500s (Self Leveling)

Air Components: J-300 / J-LX Series
from $0.37
Air control valves are available for sale for the J-LX hot tub and the J-LXL hot tub. Individual air control components and their specifications are listed below:
J-LX & J-LXL Air Control Valve (2011+) J-300 Air Control Valve (2007+)
6541-142, Control: Air Toggle Switch
6541-143, Gasket: Toggle Outer Shell
6541-144, O-Ring: Toggle Inner Shell
6540-375, Manifold: Air Control Jacket
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-300 Air Control Valve (2002-2006)
Air control valves are available for sale for the J-300 Hot Tub Series. Individual air control components and their specifications are listed below:
6540-914, Control: Air Push Button
6540-913, Gasket: Push Button Air Control
6540-522, O-Ring: Push Button Air Control
6540-912, Manifold: Push Button Air Control
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-LX/J-LXL Air Bleed Line Fitting (2011+) J-300 Air Bleed Line Fitting (2005+)
6540-252, Nut: Air Injector
6540-228, O-Ring: EPDM 0.662" ID x 0.210"
6541-263, Injector: Air PVC Gray

Knob:T-valve JHT
from $6.61
Diverter Valve Knob
2540-533, Knob: T-Valve
Compatibility:
J-LX/J-LXL: 2007+
J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+)
J-300: 2007+
6540-728, Knob: T-Valve
Compatibility:
J-300: 2002-2006

J300 Pillows & Parts (2002-2013)
from $0.63
A. 6455-007, Pillow Insert Only (for 2002-2006)
B. 2455-105, Pillow Only (for 2002-2019); Note: Replaced older 6455-006 Pillow
C. 6570-231, Screw: Pillow Attachment (for 2002-2013) (2 req'd)
D. 6570-233, Bushing: Pillow Attachment (for 2002-2013) (2 req'd)
E. 6540-282, Gasket: Pillow Attachment for (for 2002-2013) (2 req'd)
G. 6570-234, Nut: Pillow Attachment (for 2002-2013) (2 req'd)

Bracketless Emerson 56 Frame Pump Parts (5/2009+)
from $3.00
Please note: These are the Emerson-made version of these pumps. The LX-made pumps are more common (click here for the LX-made versions). You can replace the LX-made pump with an Emerson pump. However, pump parts are not interchangeable. The label will indicate if it is LX or Emerson.
Universal Mounts are available for the J-LX, J-500, J-400, J-300, and J-100 Series hot tubs. Find the specifical hot tub parts and their specifications below:
J-LX/J-LXL/J-500/J-400/J-300/J-100 North America 60Hz
6500-352S Universal Bracket Mount, 1-Speed
6500-365 Universal Bracket Mount, 1-Speed
6500-367 Universal Bracket Mount, 2-Speed
6500-363 Universal Bracket Mount, 1-Speed
Pump Parts
Union Assembly, Straight (O- 6500-232 Ring Included)
Union Assembly, 45° 6500-037 (O-Ring Included)
Union O-Ring (1 ea.) 6000-645
Drain Plug with O-Ring (1 ea.) 6500-547
Screw, Self-Tapping (1 ea.) 6500-548
Housing, Front (Volute) 6500-546
Housing O-Ring 6500-545
Impeller, 2.5hp 6500-549
Seal-Plate, rotation 6500-544
Seal, ceramic, Stationary for North American 60Hz Pumps 6500-543
Rear housing 6500-541
Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel 6540-171 **Requires new o-ring 6540-263
O-Ring, 0.434" ID x 0.682" OD x 0.125" 6540-263
Run Capacitor 2.5hp (1&2 Speed Emerson Motors Only) 6000-163

Circuit Board: J-LX, J-300, J-200 (various years/models)
$645.95
Circuit board for Jacuzzi hot tubs:
J-LX: 2011+
J-300:
2012-2013: J-375, J-365, J-355, J-345, J-335
2008-2011: J-375
2007-2011: J-365, J-355, J-345, J-335
2005-2007: J-325
2002-2006: J-345, J-340, J-335, J-330
2002-2003: J-320
J-200 (only models with circulation pump):
2007-2012: J-280, J-270, J-230
mid-year 2007-2011: J-280, J-270
2005-2017: J-285, J-280, J275, J-270, J-235, J-245, J-230
Part Number Information:
6600-726 All 2004+ J-LX & J-LXL models, Micro Chip 3.61A Included
Replaces: 6600-088, 6600-288 and 6600-167 on all above models

Suction Fittings: J-300, J-400, J-500, J-LX
from $1.59
J-300 Wall Suction Fitting (2004+)
6540-213, Filter: Spa Drain Cover; Note: Not Used After June 2008
6540-564, Grate: Suction
6540-565, Fitting: Wall Suction (Nut and 6000-564 Screw Included)
6540-620, O-Ring: Compression (Replaced 6540-520 O-Ring)
6540-619, Washer: Self Levelling Suction Assy.
6000-564, Screw: 8-32 x 12mm, 316SS
J-300 Series Skimmer/ Filter Wall Fitting (2002+)
6540-126, Fitting: Wall with High Flow Strainer (for High Flow Circ. Models); OR 6540-751, Fitting: Wall with Strainer (for Low Flow Circ. Models)
6540-753, Fitting: Wall w/o Strainer (Jet Pump 1)
6540-984, O-Ring: 2.85 ID x 0.21" C/S Double EPDM (2 Req'd.)
6540-791, Nut: 2"
6540-241, Reducer: 2" Spigot x 1/2" Slip (for Low Flow Circ. Models)
6540-085, Elbow: 1/2" Spigot x 3/4" Barb (for Low Flow Circ.Models)
J-300 Series Wall Suction (2002-2003)
6540-113, Filter: Spa Drain Cover
J-300 Filter Fill Fitting
6540-329, Filter: Fill Fitting (Reduces Air Locks During Refills).
J-LX, J-500, J-400 (2006+) Wall Suction Fitting
6540-564, Grate: Suction
6540-565, Fitting: Wall Suction (Nut and 6000-564 Screw, Included)
6540-620, O-Ring: Compression, 2"
6540-619, Washer: Self Levelling Suction Assy.
6000-564, Screw: 8-32 x 12mm, 316SS
J-LX, J-500, J-400 (2006+) Skimmer/Filter Wall Fittings
6540-126, Fitting: Wall With High Flow Strainer 2011 (for Circulation Pump)
6540-753, Fitting: Wall w/o Strainer (for Jet Pump 1)
6540-984, O-Ring: 2.85 ID x 0.21" C/S Double EPDM (2 Req'd.)
6540-791, Nut: 2" Suction Fittings (J-400 Series)
J-400 Filter Fill Fitting
6540-329, Filter: Fill Fitting (Reduces Air Locks During Fill u

J-300 Series Flow Switch
from $4.66
6560-860, Switch: Flow Assembly for J-300 LCD Series with Box End Connectors; Used on:
J-350, J-360, J-370, J-380 LCD Models (2002-2003)
J-355, J-365, J-375, J-385 LCD Models (2004-2006)
6560-852, Switch: Flow Assembly with "slip" end connectors (Note: requires 2x adapter: 6540-262 below)Used on:
J-310 (2002-2003)
J-315 (2004-2015)
J-325 (2004, 2007-2015)
6540-262, Adapter: 3/4" barb x 3/4" spigot (2 required for 6560-852 replacement).
6600-069, Harness: pressure/Flow Switch 90" Cable

Valves: Drain
from $0.78
3/4" Internal Drain, ?Can be used on any 3/4" internal drain line
J-LX/J-500/J-400/J-300 Series & 2020+ J-200 Series (Standard Drain)
6540-039, Cap: Spa Drain with Gasket, 3/4" FHTAlso compatible with 2012+ J-245, 2017+ J-215/225 and 2015+ J-115/J-125/J135/J-145
2540-303, Valve: Spa Drain (JWB# R745000)
2540-250, Nut to hold drain valve in place on cabinet
2000-035, Fitting (Not Shown): Spa Drain For Older Spas (JWB# H999000)
J-400 Series (2012+ Quick-Drain Kit)
6472-246, Drain Hose: Clear, 1-1/2" x 10'; Note: Sold by The Foot
6560-470, Cable Tie: 11"
6540-438, Fitting: Drain Barb 1-1/2"
J-400 Series Quick Drain (2013-2015)
2540-030, 1" adaptor: spigot x insert
2540-740, Clear 1" hose (sold by the foot) (recommend length 3 feet)
2540-005, 35mm clamp
6540-170, Reducer: 1-1/2" spigot to 1" slip
6540-509, EDPM O-ring (2.35 inner diameter)
6540-597, Quick-Drain: Assembly with Check Valve (Complete), 1-1/2" Slip
6540-016, 3/4" Slip x Slip coupler
PFT003, Tee: 1" slip x 1" slip x 3/8" barb