Jacuzzi J-400 Parts

Jacuzzi Brand Pillow for J-400 Collection   Jacuzzi pillows for the J-400 collection (all years, all models). Please note that pillows do not include mounting hardware or sliders.   2570-401, Slider: J-400 Series Pillows (for 2472-820 and 2472-822) 2000-263, Oval Pillow Insert, Logo (Emblem)   J400 pillow compatibility by year:  Model Pillow:6455-031 Pillow:2472-820*" DOES NOT INCLUDE SLIDER Pillow:2472-822* DOES NOT INCLUDE SLIDER J-495 2020+ 2012-2019 -- J-485 2019+ -- -- J-480 -- mid 2009-2018 2006-mid 2009 J-475 2019+ -- -- J-470 -- mid 2009-2018 2006-mid 2009 J-465 -- mid 2009-2017 2007-mid 2009 J-460 mid 2009-2012 2006-mid 2009 J-445 Oct 2017+ -- -- J-435 Oct 2017+ -- -- J-425 2020+ mid 2009-2019 -- J-415 -- mid 2009-2019 -- *Slider (2570-401) is required for 2472-820 and 2472-822 " Jacuzzi emblem available for pillow 2472-820

J-LX & J-LXL Series (2011+) Assembly Used on 2020+ J-425 & J-495, 2019+ J-485 & J-475 and 10/2017+ J-445 & J-435 6540-439, Knob: Diverter J-445, 2017 6540-455 Nut: Diverter J-400 (Clear) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D. 6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately) 6541-014, Fitting: Wall T-Valve J-400 (Clear) 6560-320, Light ring: Diverter Top HT 6560-312, Nut: J400 (Clear) 6540-560 (2/16/18+), Body: T-Valve 2018  Assembly Used on All other 2016+ J-400 Models 2540-533, Knob: Diverter (2007+ J-400/J-300) 20090-001, Knob: Diverter (2006 J-400 Series) 6540-729, Cap: Diverter (All 2002+ Models) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D.  6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967 

Note: Some parts may not be in stock at the time of ordering and shipping may be delayed. J-300 LED Display Models (2002-2015) J-200 Series (2005-2017), J-100 Series (2017 Only), Del Sol Series (All Years)  6600-166, Sensor: Temp Sensors with Curled Finger Connectors, 12' (3.7m)  J-400/J-1000 Series 6600-181, Sensor: Temp Sensors with DSMT Connector, 8' (2.4m) Cable J-400 Series (2006-2009) 6600-167, Sensor: Temp Sensors with Box End Connectors, 12' (3.7m) Cable; Note: Also used in 2002-2003 J-350, J-360, J-370, J-380, 2004-2006 J-355, J-365, J-375, J-385, and all 2006-2009 J-400 models. J-400 Series (2010-2015) 6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector), 37"(94cm) Cable J-500 Series (2015+), J-400 Series (09/2015+), J-300 Series (2016+), J-200 Series (2018+), J-100 Series (2018+) 6600-751, Sensor: Assembly Water Temp, 3-Pin O-RING for 6600-166 & 6600-167 6540-228   6600-551, Long-tip Water Temperature Sensor, 3-Pin connector, Glass Bead Thermistor. Can replace 6600-533.  

J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)   Compatible Pumps (LX Version; Not Emerson) 6500-352S 6500-365S 6500-367S 6500-363S 6500-845S 6500-090S 6500-357S   6500-232 Union Assembly, straight (o-ring included) 6500-037 Union Assembly, 45 degree (o-ring included) 6000-645 Union o-ring 6500-601 Screw, Self-Tapping (1 ea) 6500-602 Drain Plug 6500-603 Drain Plug O-Ring 6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030) 6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"  6500-604 Housing, Front (Volute) 56FR 6500-605 Housing O-Ring 6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors) 6500-281 Seal-Stationary ASM (PS200) 6500-606 Housing Rear 56FR 6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

J-400/J-1000 Series (2010-08/2015) 6560-651, Switch: Flow Switch Assembly with 5' (1.5m) Cable, DSMT; Note: For J-400/J-1000 Systems Only J-LX & J-LXL (2011+), J-500 Series (2015+), J-400 (09/2015+), J-300 Convertible Models (2016+) 2560-040, Switch: Flow Vert Heater with a Curled finger connectors J-400 Series (2006-2009) 6560-646, Switch: Flow Switch Assembly with 5' (1.5m) Cable And Box End Connectors

Compatible with:  J-LX/LXL Series 2015-2019  J-315 2016+  J-325 2016+  J-355 2014+  J-345 2014+  J-355 2014+  J-365 2014+  J-375 2014+  J-385 2016+  J-415 2014-2019  J-425 2016-2019  J-435 2018+  J-445 2018+  J-465 2016-2017  J-470 2016-2018  J-475 2019+  J-480 2016-2018  J-485 2019+ J-495 2016+ J-575/585 2015+ 6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon 6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included) 6541-644, Washer: 500s (Self Leveling)

Diverter Valve Knob 2540-533, Knob: T-Valve Compatibility: J-LX/J-LXL: 2007+ J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+) J-300: 2007+      6540-728, Knob: T-Valve Compatibility: J-300: 2002-2006  

Please note: These are the Emerson-made version of these pumps. The LX-made pumps are more common (click here for the LX-made versions). You can replace the LX-made pump with an Emerson pump. However, pump parts are not interchangeable. The label will indicate if it is LX or Emerson.     Universal Mounts are available for the J-LX, J-500, J-400, J-300, and J-100 Series hot tubs. Find the specifical hot tub parts and their specifications below:    J-LX/J-LXL/J-500/J-400/J-300/J-100 North America 60Hz  6500-352S Universal Bracket Mount, 1-Speed 6500-365 Universal Bracket Mount, 1-Speed 6500-367 Universal Bracket Mount, 2-Speed 6500-363 Universal Bracket Mount, 1-Speed   Pump Parts Union Assembly, Straight (O- 6500-232 Ring Included) Union Assembly, 45° 6500-037 (O-Ring Included) Union O-Ring (1 ea.) 6000-645 Drain Plug with O-Ring (1 ea.) 6500-547 Screw, Self-Tapping (1 ea.) 6500-548 Housing, Front (Volute) 6500-546 Housing O-Ring 6500-545 Impeller, 2.5hp 6500-549 Seal-Plate, rotation 6500-544 Seal, ceramic, Stationary for North American 60Hz Pumps 6500-543 Rear housing 6500-541 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel 6540-171 **Requires new o-ring 6540-263 O-Ring, 0.434" ID x 0.682" OD x 0.125" 6540-263 Run Capacitor 2.5hp (1&2 Speed Emerson Motors Only) 6000-163

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-729, Light: LED Dual 12V 6"& 6"(J-475 and J-485 Only) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) 6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-358, Housing: LED indicator 6541-089, Base: Indicator light 6540-595, Flange: Indicator light 6540-592, Plate: Logo indicator light J-445 & J-435 Models Only (10/2017-2018) 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) A. 6560-356, Housing (Only): Exterior Light J-400 2017 B. 6560-759, Light Assembly (Light only): Ext Corner J-400 2017  6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) 6560-966, Light: Waterfall J-400, 12V 2016 (Complete) 6560-603, Lens: Pillow Light J-400 (mid 2009+ excluding J-445 & J-435) 6560-205, Lens: Pillow Light J-400 with mini-DIN connector (mid 2013-2015 excluding J-445 & J-435) 6560-303, Light: LED Quad 12V 54"? 6560-968, LED Light: Single Bullet, 70"(Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7' (Yellow) J-400 Series (2013-2014) 6560-183, Light: Waterfall J-400 Clip On with mini-DIN Plug 2013 J-400 Series (2006-2014) 6560-115, 2013+ Light: Logo Seat Assembly with mini-DIN connectors and 2 O-Rings (4 O-Rings and 2 Nuts are required; purchased separately below) 6540-514, O-Ring: EPDM 1.22"ID, Double 6540-685, Nut: Accu-pressure 6560-183, Clip-on waterfall light (2006-2012) replaces 20096-001 and requires 6000-362 20263-001, Harness: Waterfall feature, 2 into 1 J-400 Series (2015-08/15) 6560-958, Light: LED Quad Pin 54"

IX Jet (*For 10/17+ J-445 & J-435 Models Only) 6541-013‡, Jet Face: Assembly IX Jet (No LED Lighting) 6540-420, Pipe, Flex 2" (1.25' Long) 20178-001‡, Venturi Tee, Pre-Assembled, 1.5" x 2" 6570-033, Clamp, 27mm 6540-065, Adapter 1" Spigot x 0.75" Insert 20216-001‡, Valve, Check, 0.75" Air   IX Jet for 2013+ J-400 Series 6560-970‡ 09/2015+ Jet Face: Assembly IX Jet w/ Multi-Color LED Light And Mini-DIN Connector for 12V Balboa controllers ONLY. Not compatible with older systems 6540-520, O-Ring: Double EDPM, 3.312"ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-443, Nut: Serviceable Light 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip x 3/4" Barb     IX Jet (2006-2012 J-400 Series) 6560-103‡, Jet Face: Assembly IX Jet w/Multi- Color LED Light And Mini-DIN Connector; 6000-362 Adapter Cable 6540-520, O-Ring: Double EDPM, 3.312" ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip 3/4" Barb   ‡Please note: These parts are special order and are not eligible for cancellation, refund or exchange.  Please reach out to our team if you need to verify the part you require.

6570-250, Catch: Shield attachment on spa shell J-495, J-425, J-415 2012+ All J-400 & J-500 series hot tubs 2013+ All J-300 & J-200 series hot tubs 2006+     6570-251, Hook: Shield attachment on skimmer shield All J-300 & J-200 series hot tubs 2006+     6570-397, Hook: Shield Attachment J-495/J-425/J-415 2012+ All J-500 & J-400 series hot tubs 2012+  

6570-391 SKIMMER: CLIP, DEBRIS ATTACHMENT

Air control valves are available for sale for the J-400 Series by Jacuzzi® Hot Tub. The air control valve is suitable for all hot tub models, but the part number will change depending on the model: individual air control components and their specifications are listed below: J-400 Air Components (2006+) Air Control Valve (All J-435, J-445, J-475, J-485, & 2020+ J-425, J-495) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control  Air Control Valve (All other J-400 Models) 20101-001, Knob: Air Valve 6540-377, Control: Air Body And Stem 6540-522, O-Ring: EPDM, 1.64" ID x 0.163" 6540-375, Manifold: Air Control Jacket 6540-376, Nut: Air Control 6000-179, Knob Stem 6000-016, Cup (Long) 6000-029, O-Ring  Filter/Skimmer Air Bleed Line 20216-001, Check Valve: 3/4" Air 6540-024, Adapter: 1/2" Spigot x 3/8" Barb 6570-491, Clamp: Metal Hose (Black) IX Jet Air Bleed Check Valve 20216-001, Check Valve: 3/4" Air 6540-065, Adapter: 1" Spigot x 3/4" Barb 6570-033, Clamp: 27mm J-400 Air Bleed Line (2009+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray

The Jacuzzi Chemical Dispense is an optional attachment that installs easily to the center filter cap on all J300 and J400 spas. Control the rate of tablet dissolve by a sliding fitting inside the dispenser.   Note: Chlorine tablets are damaging to hot tubs and may void your warranty. It is recommended that this product not be used in hot tubs. It is safer and better to use granules (How much chlorine do I use?)

Weir: Floating Skimmer Assembly Fits 2012 J-480, J-470, J-465, J-460 and All 2006-2011 J-400 Models J-400 (Attaches to Skimmer Weir) 6540-845