
Bracketless LX 56 Frame Pump Parts (5/2009+)
from $0.50
J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)
Compatible Pumps (LX Version; Not Emerson)
6500-352S
6500-365S
6500-367S
6500-363S
6500-845S
6500-090S
6500-357S
6500-232 Union Assembly, straight (o-ring included)
6500-037 Union Assembly, 45 degree (o-ring included)
6000-645 Union o-ring
6500-601 Screw, Self-Tapping (1 ea)
6500-602 Drain Plug
6500-603 Drain Plug O-Ring
6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030)
6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"
6500-604 Housing, Front (Volute) 56FR
6500-605 Housing O-Ring
6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors)
6500-281 Seal-Stationary ASM (PS200)
6500-606 Housing Rear 56FR
6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

Jet Assemblies: PowerPro FX2-S Spinner Jet (2/2014+)
from $2.63
Compatible with:
J-LX/LXL Series 2015-2019
J-315 2016+
J-325 2016+
J-355 2014+
J-345 2014+
J-355 2014+
J-365 2014+
J-375 2014+
J-385 2016+
J-415 2014-2019
J-425 2016-2019
J-435 2018+
J-445 2018+
J-465 2016-2017
J-470 2016-2018
J-475 2019+
J-480 2016-2018
J-485 2019+
J-495 2016+
J-575/585 2015+
6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon
6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included)
6541-644, Washer: 500s (Self Leveling)

Air Components: J-300 / J-LX Series
from $0.37
Air control valves are available for sale for the J-LX hot tub and the J-LXL hot tub. Individual air control components and their specifications are listed below:
J-LX & J-LXL Air Control Valve (2011+) J-300 Air Control Valve (2007+)
6541-142, Control: Air Toggle Switch
6541-143, Gasket: Toggle Outer Shell
6541-144, O-Ring: Toggle Inner Shell
6540-375, Manifold: Air Control Jacket
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-300 Air Control Valve (2002-2006)
Air control valves are available for sale for the J-300 Hot Tub Series. Individual air control components and their specifications are listed below:
6540-914, Control: Air Push Button
6540-913, Gasket: Push Button Air Control
6540-522, O-Ring: Push Button Air Control
6540-912, Manifold: Push Button Air Control
6540-911, Nut: Push Button Air Control
6540-910, Elbow: Push Button Air Control
J-LX/J-LXL Air Bleed Line Fitting (2011+) J-300 Air Bleed Line Fitting (2005+)
6540-252, Nut: Air Injector
6540-228, O-Ring: EPDM 0.662" ID x 0.210"
6541-263, Injector: Air PVC Gray

Knob:T-valve JHT
from $6.61
Diverter Valve Knob
2540-533, Knob: T-Valve
Compatibility:
J-LX/J-LXL: 2007+
J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+)
J-300: 2007+
6540-728, Knob: T-Valve
Compatibility:
J-300: 2002-2006

Bracketless Emerson 56 Frame Pump Parts (5/2009+)
from $3.00
Please note: These are the Emerson-made version of these pumps. The LX-made pumps are more common (click here for the LX-made versions). You can replace the LX-made pump with an Emerson pump. However, pump parts are not interchangeable. The label will indicate if it is LX or Emerson.
Universal Mounts are available for the J-LX, J-500, J-400, J-300, and J-100 Series hot tubs. Find the specifical hot tub parts and their specifications below:
J-LX/J-LXL/J-500/J-400/J-300/J-100 North America 60Hz
6500-352S Universal Bracket Mount, 1-Speed
6500-365 Universal Bracket Mount, 1-Speed
6500-367 Universal Bracket Mount, 2-Speed
6500-363 Universal Bracket Mount, 1-Speed
Pump Parts
Union Assembly, Straight (O- 6500-232 Ring Included)
Union Assembly, 45° 6500-037 (O-Ring Included)
Union O-Ring (1 ea.) 6000-645
Drain Plug with O-Ring (1 ea.) 6500-547
Screw, Self-Tapping (1 ea.) 6500-548
Housing, Front (Volute) 6500-546
Housing O-Ring 6500-545
Impeller, 2.5hp 6500-549
Seal-Plate, rotation 6500-544
Seal, ceramic, Stationary for North American 60Hz Pumps 6500-543
Rear housing 6500-541
Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel 6540-171 **Requires new o-ring 6540-263
O-Ring, 0.434" ID x 0.682" OD x 0.125" 6540-263
Run Capacitor 2.5hp (1&2 Speed Emerson Motors Only) 6000-163

J-LX & J-LXL Series Skimmer Shield Parts (2011+)
from $0.35
6570-381, Grill: Jacuzzi 2011
6570-119, Grill: Left Lift Hinge Kit (For 6570-381 Grill)
6570-071, Grill: Right Lift Hinge Kit (For 6570-381 Grill)
6570-061, Magnetic Latch Plate (For 6570-381)
6570-116, Strike plate for 6570-061
6570-122, Clip: (Two Required for 6570-381 Grill)
6570-220, Screw 8-32 x 3/8" PHP Nylon (Two Req'd for 6570-061 Magnetic Latch)
6570-219, Nut: 8-32 x 3/8" Hex Nylon (Two Req'd for 6570-061 Magnetic Latch)

Circuit Board: J-LX, J-300, J-200 (various years/models)
$645.95
Circuit board for Jacuzzi hot tubs:
J-LX: 2011+
J-300:
2012-2013: J-375, J-365, J-355, J-345, J-335
2008-2011: J-375
2007-2011: J-365, J-355, J-345, J-335
2005-2007: J-325
2002-2006: J-345, J-340, J-335, J-330
2002-2003: J-320
J-200 (only models with circulation pump):
2007-2012: J-280, J-270, J-230
mid-year 2007-2011: J-280, J-270
2005-2017: J-285, J-280, J275, J-270, J-235, J-245, J-230
Part Number Information:
6600-726 All 2004+ J-LX & J-LXL models, Micro Chip 3.61A Included
Replaces: 6600-088, 6600-288 and 6600-167 on all above models

Valves: Drain
from $0.78
3/4" Internal Drain, ?Can be used on any 3/4" internal drain line
J-LX/J-500/J-400/J-300 Series & 2020+ J-200 Series (Standard Drain)
6540-039, Cap: Spa Drain with Gasket, 3/4" FHTAlso compatible with 2012+ J-245, 2017+ J-215/225 and 2015+ J-115/J-125/J135/J-145
2540-303, Valve: Spa Drain (JWB# R745000)
2540-250, Nut to hold drain valve in place on cabinet
2000-035, Fitting (Not Shown): Spa Drain For Older Spas (JWB# H999000)
J-400 Series (2012+ Quick-Drain Kit)
6472-246, Drain Hose: Clear, 1-1/2" x 10'; Note: Sold by The Foot
6560-470, Cable Tie: 11"
6540-438, Fitting: Drain Barb 1-1/2"
J-400 Series Quick Drain (2013-2015)
2540-030, 1" adaptor: spigot x insert
2540-740, Clear 1" hose (sold by the foot) (recommend length 3 feet)
2540-005, 35mm clamp
6540-170, Reducer: 1-1/2" spigot to 1" slip
6540-509, EDPM O-ring (2.35 inner diameter)
6540-597, Quick-Drain: Assembly with Check Valve (Complete), 1-1/2" Slip
6540-016, 3/4" Slip x Slip coupler
PFT003, Tee: 1" slip x 1" slip x 3/8" barb

Dispenser: Chemical
$19.95
The Jacuzzi Chemical Dispense is an optional attachment that installs easily to the center filter cap on all J300 and J400 spas. Control the rate of tablet dissolve by a sliding fitting inside the dispenser.
Note: Chlorine tablets are damaging to hot tubs and may void your warranty. It is recommended that this product not be used in hot tubs. It is safer and better to use granules (How much chlorine do I use?)

Pillow: Jacuzzi J-LX Collection
from $54.95
Jacuzzi Brand Pillow for J-LX Collection.
2472-006
Replaces: 6455-485

Hi-Limit Sensors
from $20.95
Note: Not all hi-limit sensors may be in stock and delivery times may be delayed. Hi-limit sensors are non-refundable/non-returnable.
Use the chart below to determine which hi-limit sensors are compatible with your hot tub. Please note: all hi-limit sensors except 6600-168 are used for LED top-side controllers. If your J-300 series has an LCD controller, do not use an LED hi-limit sensor. Please contact or chat with us if you are unsure.
6600-140, Sensor: Hi-limit LED Series with Connector; Includes Curled Finger Contacts (32" cable)
6600-144, Sensor: Hi-limit LED Series without Connector; Includes Curled Finger Connectors (32" Cable)
6472-525, Harness: Hi-Limit LX 2-Pin (32" Cable)
6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector for J-1000) (37" Cable)
6600-110, Sensor: Hi-limit with Box End Connectors (90" Cable)
6600-129, Sensor: Hi-limit J-300/J-200 LED with Curled Finger Connectors
6600-168, Sensor: Hi-limit J-300/J-400 LCD with Box End Connectors
6000-093, Sensor: Hi-limit Disc ( All models)
6600-140
6600-144*
6472-525
6600-179
6600-110
6600-129**
6600-168 (LCD)
J-LX/J-LXL
2011+
2011+
J-500 Series (all)
2015+
J-400 Series (all)
Sept 2015+
2010-Aug 2015
2006-2009
2006-2009 LCD
J-300 Series (all)
2016+
2002+ LCD
J-310
2002-2003
2002-2003
J-315
2013-2016
2004-2017
2004-2015
J-320
2002-2003
J-325
2013-2016
2004-2017
2004 & 2008 & 2012-2015
J-330
2002-2003
J-335
2013-2016
2004-2017
J-340
2002-2003
J-345
2013-2016
2004-2017
J-350
2002-2003
2002-2003
J-355
2013-2016
2007-2017
2004-2006
2004-2006
J-360
2002-2003
2002-2003
J-365
2013-2016
2007-2017
2004-2006
2004-2006
J-370
2002-2003
2002-2003
J-375
2013-2016
2007-2017
2004-2006
2004-2006
J-380
2002-2003
2002-2003
J-385
2004-2006
2004-2006
J-200 Series (all)
2018+
J-210
2012-2017
2005-2017
J-220
2005-2017
J-230
2012-2017
2005-2017
J-235
2012-2017
2012-2017
J-245
2012-2017
2012-2017
J-270
2012-2017
2007-2017
J-275
2012-2017
2012-2017
J-280
2012-2017
2007-2017
J-100 Series (all)
2012-2017
2018+
Del Sol
All
*Can use 6600-140**Can use 6600-144

Jet Assemblies: Mini PowerPro FX/FX-1 Jet (2/2004+)
from $1.30
Compatible with:
J-LX/LXL Series 2015-2019
J-315 2016+
J-325 2016+
J-355 2014+
J-345 2014+
J-355 2014+
J-365 2014+
J-375 2014+
J-385 2016+
J-415 2014-2019
J-425 2016-2019
J-435 2018+
J-445 2018+
J-465 2016-2017
J-470 2016-2018
J-475 2019+
J-480 2016-2018
J-485 2019+
J-495 2016+
J-575/585 2015+
1a. 6541-170, Jet Face: Mini PowerPro FX-1 PC with Stainless Steel Escutcheon, 2015+ (Dark Gray)1b. 20285-001, Jet Face: Mini PowerPro FX with Stainless Steel Escutcheon (Light Gray - 2/2004 - 2014)
6540-555, Jet Face: Mini PowerPro FX without Stainless Steel Escutcheon (See Note)
6540-556, Jet Back: Mini PowerPro FX
6541-098, O-Ring: EDPM 1.98" I.D. x 0.163", Double
6540-639, Washer: Self Leveling Mini PowerPro FX
6540-557, Nut: Mini PowerPro FX, 2004+

Filter Caps
$4.83
Filter caps are available to order online. These filter caps are compatible with filters 6000-383AJ

Diverter Valves: J-LX/J-LXL Series
from $6.13
J-LX & J-LXL Series (2011+)
2540-533, Knob: T-Valve JHT, 2007
6541-359, Knob: Side Valve, 2011
6540-729, Cap: T-Valve (Oval)
6540-876, Cap: T-Valve (Phoenix)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately)
6541-969, Fitting: Wall Diverter
6540-511, O-Ring: 2.85" I.D. x 0.21" (2 Required)
6540-968, Nut: Diverter
6541-358, Body: Side