Lights (10)

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17” & 17” (Yellow) 6560-729, Light: LED Dual 12V 6” & 6” (J-475 and J-485 Only) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) 6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-358, Housing: LED indicator 6541-089, Base: Indicator light 6540-595, Flange: Indicator light 6540-592, Plate: Logo indicator light J-445 & J-435 Models Only (10/2017-2018) 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) A. 6560-356, Housing (Only): Exterior Light J-400 2017 B. 6560-759, Light Assembly (Light only): Ext Corner J-400 2017  6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17” & 17” (Yellow) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) 6560-966, Light: Waterfall J-400, 12V 2016 (Complete) 6560-603, Lens: Pillow Light J-400 (mid 2009+ excluding J-445 & J-435) 6560-205, Lens: Pillow Light J-400 with mini-DIN connector (mid 2013-2015 excluding J-445 & J-435) 6560-303, Light: LED Quad 12V 54” 6560-968, LED Light: Single Bullet, 70” (Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7’ (Yellow) J-400 Series (2013-2014) 6560-183, Light: Waterfall J-400 Clip On with mini-DIN Plug 2013 J-400 Series (2006-2014) 6560-115, 2013+ Light: Logo Seat Assembly with mini-DIN connectors and 2 O-Rings (4 O-Rings and 2 Nuts are required; purchased separately below) 6540-514, O-Ring: EPDM 1.22” ID, Double 6540-685, Nut: Accu-pressure 6560-183, Clip-on waterfall light (2006-2012) replaces 20096-001 and requires 6000-362 20263-001, Harness: Waterfall feature, 2 into 1 J-400 Series (2015-08/15) 6560-958, Light: LED Quad Pin 54”

6560-189, Light DCU Mini-DIN, 10 output 2013+ with 5’ power cable; Note: includes cable “hold down” clips on all DCUs shipped after 2/15/14. 6560-022, Light: Dual Pin/ Waterfall 2011 6560-271, Light: Dome Wash JHT 2013+ with Mini-DIN connector (Pillow Accent Lights) 6000-362, Adapter: Mini-DIN to Ribbon connector (adapts older 6560-033 DCU to current 2013 JLX Light System Components with Mini-Din connectors)  

J-300 Series (2020+) 6560-969, Adapter: DCU Expansion Box 12V, 2016 (Yellow) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And 2 O-Rings Included) 6560-301, Light: LED Quad 12V 54” & 180” 6560-303, Light: LED Quad 12V 54” 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7’ (Yellow) 6000-493, Light: J-300 Corner, Complete. Contains 1 each of A through C below, and 2 each of D and E. A. 6541-341, Tube: LED Corner Light J-300 B. 6560-334, Light: Corner, white, 12V J-300 C. 6570-467, Bracket: Light, corner J-300 D. 6570-477, Ring: J-300 Corner light E. 6541-411, End Cap: J-300 Corner light 6560-978, Lens: Bullet 720 Flange 6541-409, O-Ring: EPDM-111 (for 6560-978) 6541-408, Nut: Plastic Hex, 3/4 (for 6560-978) 6560-347, Harness: J-300 Corner light (Contains 6560-347, 6570-453 and 4 of 6000-493) J-300 Series (2016 - 2019) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7’ (Yellow) J-300 LED Series (2007-2012) 2560-908, Light: Pillow 6560-136, LED footwell assembly including ribbon connector and LED (includes A, B & D). Gaskets (C) purchased separately. Note: You must order the complete assembly to get the LED light. 6541-136, Wall fitting for LED footwell light 6540-527, O-Ring (1.67" ID x 0.163", double) Two required

6560-603, Lens: Pillow Light for 2016+ 6560-205, Slider: Lens, 2013-2015 (with mini-DIN connector) 2540-701, Slider: Lens, 2009-2012

J-200 Series (2012+) & J-100 Series (2017+) Footwell Light Assembly 2012+ J-280, J-275, J-245, J-235 Models 309002, Light Body 6541-088, O-Ring: Light Body 309003, Light Nut 6541-553, Housing: LED 3" 6560-246, Incandescent Bulb: 12V 6560-553, Light: LED 3" Daisy 6560-144, Harness: Light 12V 2007.5 2018+ J-210 Models Only 6560-218, Light: LED Multi-Color (Amp) 2007-2017 J-210 Models Only 6560-420, Light: LED Multi-color (Phone Jack Connector)

6560-135, Light DCU (Blue). Replaced 6560-134. Note: the cable marked "constant" is not used.   6000-362, Mini-DIN to Ribbon connector

Please Note: This part may not be in stock and may delay your order. This part is used as the LED lighting controller in some Nordic Hot Tubs.

J-500 Series 2015+ 6560-196, Adapter, DCU Expansion Box 2015 6560-912, Light Engine: Fiber JHT/SD 2015 6560-146, Light: Footwell LED Multicolor J500, 2015 (Nut And O-Ring Included) 6570-206, Bracket, J500 Corner Light 6560-911, Light: Exterior Corner JHT/SD 2015 6560-199, Cord: MiniDin-6 to XA Connector 6560-821, Fiber optic: Internal Perimeter Light 6541-828, Channel: Internal Perimeter Light J-500 6541-823, Complete KIt: Internal Perimeter Light, Right (2 Pieces, O-Rings & Hardware included) 6541-824, Complete KIt: Internal Perimeter Light, Left (2 Pieces, O-Rings & Hardware Included)  

6560-555, DCU: LED Daisy**Note: The 2007 DCU looks different, but this is the replacement Used in all 2007-2011 J-100 & J-200.

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6000-494, Light, J400 Corner: Complete Assembly (Contains items 1 through 6 below). 1. 6570-429, Bracket: Corner light 2. 6560-526, Light: Corner, white 12V 3. 6540-586, Tube LED: Corner light 4. 6560-357, Housing: Corner light 5. 6540-585, End Cap: Corner light 6. 6540-613, End Cap: Angled, corner light 6473-213, Corner light kit, aftermarket, complete. Contains 4 each of parts 1 - 6 above.