All Hot Tub Parts (281)

IX Jet (*For 10/17+ J-445 & J-435 Models Only) 6541-013‡, Jet Face: Assembly IX Jet (No LED Lighting) 6540-420, Pipe, Flex 2" (1.25' Long) 20178-001‡, Venturi Tee, Pre-Assembled, 1.5" x 2" 6570-033, Clamp, 27mm 6540-065, Adapter 1" Spigot x 0.75" Insert 20216-001‡, Valve, Check, 0.75" Air   IX Jet for 2013+ J-400 Series 6560-970‡ 09/2015+ Jet Face: Assembly IX Jet w/ Multi-Color LED Light And Mini-DIN Connector for 12V Balboa controllers ONLY. Not compatible with older systems 6540-520, O-Ring: Double EDPM, 3.312"ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-443, Nut: Serviceable Light 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip x 3/4" Barb     IX Jet (2006-2012 J-400 Series) 6560-103‡, Jet Face: Assembly IX Jet w/Multi- Color LED Light And Mini-DIN Connector; 6000-362 Adapter Cable 6540-520, O-Ring: Double EDPM, 3.312" ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip 3/4" Barb   ‡Please note: These parts are special order and are not eligible for cancellation, refund or exchange.  Please reach out to our team if you need to verify the part you require.

  6560-860, Switch: Flow Assembly for J-300 LCD Series with Box End Connectors; Used on: J-350, J-360, J-370, J-380 LCD Models (2002-2003) J-355, J-365, J-375, J-385 LCD Models (2004-2006) 6560-852, Switch: Flow Assembly with "slip" end connectors (Note: requires 2x adapter: 6540-262 below)Used on: J-310 (2002-2003) J-315 (2004-2015) J-325 (2004, 2007-2015) 6540-262, Adapter: 3/4" barb x 3/4" spigot (2 required for 6560-852 replacement).   6600-069, Harness: pressure/Flow Switch 90" Cable

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-729, Light: LED Dual 12V 6"& 6"(J-475 and J-485 Only) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) 6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-358, Housing: LED indicator 6541-089, Base: Indicator light 6540-595, Flange: Indicator light 6540-592, Plate: Logo indicator light J-445 & J-435 Models Only (10/2017-2018) 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) A. 6560-356, Housing (Only): Exterior Light J-400 2017 B. 6560-759, Light Assembly (Light only): Ext Corner J-400 2017  6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) 6560-966, Light: Waterfall J-400, 12V 2016 (Complete) 6560-603, Lens: Pillow Light J-400 (mid 2009+ excluding J-445 & J-435) 6560-205, Lens: Pillow Light J-400 with mini-DIN connector (mid 2013-2015 excluding J-445 & J-435) 6560-303, Light: LED Quad 12V 54" 6560-968, LED Light: Single Bullet, 70"(Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7' (Yellow) J-400 Series (2013-2014) 6560-183, Light: Waterfall J-400 Clip On with mini-DIN Plug 2013 J-400 Series (2006-2014) 6560-115, 2013+ Light: Logo Seat Assembly with mini-DIN connectors and 2 O-Rings (4 O-Rings and 2 Nuts are required; purchased separately below) 6540-514, O-Ring: EPDM 1.22"ID, Double 6540-685, Nut: Accu-pressure 6560-183, Clip-on waterfall light (2006-2012) replaces 20096-001 and requires 6000-362 20263-001, Harness: Waterfall feature, 2 into 1 J-400 Series (2015-08/15) 6560-958, Light: LED Quad Pin 54"

Please Note: Some parts may be out of stock and shipping may be delayed.  6472-729, Original pillows for Marin & Cambria starting March 2018+ Cambria: March 2018+ (3 pillows) Marin: March 2018+ (4 pillows)   6472-793, Original pillow for 880 Series starting January 23, 2019 Altamar (3 pillows) Aspen (4 pillows) Cameo (3 pillows) Capri (3 pillows) Maxxus (4 pillows) Optima (4 pillows)   6472-964, Original pillow for 880 series before January 23, 2019: Altamar: 2009-01/22/2019 (3 pillows) Aspen: 2012-01/22/2019 (4 pillows) Cameo: 2009-01/22/2019 (3 pillows) Capri: 2013-01/22/2019 (3 pillows) Marin: 2010-Feb 2017 (4 pillows) Maxxus: 2009-01/22/2019 (4 pillows) Optima: 2009-01/22/2019 (4 pillows)    6472-962, Original pillow for 880 series before 2014 Cameo: 2001-2004 (1 pillow) Cameo Ing: 2003-2014 (1 pillow) Majesta: 2005-2008 (1 pillow) Marin: 2001 (1 pillow) Maxxus: 2001-2004 (1 pillow) Metro: 2001-2004 (1 pillow) Optima: 2001-2008 (2 pillows) Optima Ing: 2003-2014 (2 pillows)

J-280 Models (2007+) 2540-239, T-Valve: Cap And Knob 2540-274, T-Valve: Knob 2540-273, T-Valve: Cap 6541-241, O-Ring: Stem 6541-240, O-Ring: Body 6541-242, Gate Valve (T-Valve) 2540-275, Fitting: Wall T-Valve (6541-238 Nut Included) 6541-238, Nut: Diverter 6541-236, Body Assembly: T-Valve (Includes one each of items 4 through 6 above) J-210 (2005+) A 6541-800, Jet Face: Divert-A-Jet (Graphite Color for 2012+ J-210 Models) B 6540-800, Jet Face: Divert-A-Jet (Gray 2011 And Older Models) 6540-797, Wall Fitting: Divert-A-Jet 6540-511, O-Ring: Divert-A-Jet 6540-798, Nut: Divert-A-Jet 6540-796, Jet Back: Divert-A-Jet

Compatible with:  J-210 2012+ J-215 2016+ J-225 2016+ J-235 2014-2019 J-245 2014-2019 J-275 2014-2019 J-280 2014-2019 2540-261, Jet Face: 200s Micro (DX Jet, Grey)B 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 6541-576, Jet Face: Classic PRO Pulsating 6541-577, Jet Face: Classic PRO Accu Pressure 6541-612, Jet Back: 200s (Nut And O-Ring Included) 6540-854, O-Ring: 200s 6541-614, Washer: 200s (Self Leveling)

Note: Not all hi-limit sensors may be in stock and delivery times may be delayed. Hi-limit sensors are non-refundable/non-returnable.   Use the chart below to determine which hi-limit sensors are compatible with your hot tub. Please note: all hi-limit sensors except 6600-168 are used for LED top-side controllers. If your J-300 series has an LCD controller, do not use an LED hi-limit sensor. Please contact or chat with us if you are unsure.  6600-140, Sensor: Hi-limit LED Series with Connector; Includes Curled Finger Contacts (32" cable) 6600-144, Sensor: Hi-limit LED Series without Connector; Includes Curled Finger Connectors (32" Cable) 6472-525, Harness: Hi-Limit LX 2-Pin (32" Cable)  6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector for J-1000) (37" Cable) 6600-110, Sensor: Hi-limit with Box End Connectors (90" Cable) 6600-129, Sensor: Hi-limit J-300/J-200 LED with Curled Finger Connectors 6600-168, Sensor: Hi-limit J-300/J-400 LCD with Box End Connectors 6000-093, Sensor: Hi-limit Disc ( All models) 6600-140 6600-144* 6472-525 6600-179 6600-110 6600-129** 6600-168 (LCD) J-LX/J-LXL 2011+ 2011+ J-500 Series (all) 2015+ J-400 Series (all) Sept 2015+ 2010-Aug 2015 2006-2009 2006-2009 LCD J-300 Series (all) 2016+ 2002+ LCD J-310 2002-2003 2002-2003 J-315 2013-2016 2004-2017 2004-2015 J-320 2002-2003 J-325 2013-2016 2004-2017 2004 & 2008 & 2012-2015 J-330 2002-2003 J-335 2013-2016 2004-2017 J-340 2002-2003 J-345 2013-2016 2004-2017 J-350 2002-2003 2002-2003 J-355 2013-2016 2007-2017 2004-2006 2004-2006 J-360 2002-2003 2002-2003 J-365 2013-2016 2007-2017 2004-2006 2004-2006 J-370 2002-2003 2002-2003 J-375 2013-2016 2007-2017 2004-2006 2004-2006 J-380 2002-2003 2002-2003 J-385 2004-2006 2004-2006 J-200 Series (all) 2018+ J-210 2012-2017 2005-2017 J-220 2005-2017 J-230 2012-2017 2005-2017 J-235 2012-2017 2012-2017 J-245 2012-2017 2012-2017 J-270 2012-2017 2007-2017 J-275 2012-2017 2012-2017 J-280 2012-2017 2007-2017 J-100 Series (all) 2012-2017 2018+ Del Sol All   *Can use 6600-140**Can use 6600-144

  Compatibility: 06/2014+ 680 McKinley and Ramona 2013+ 680 Edison 2012+ 680 Peyton 1. 6560-581, Lens, Bullet 1" 2. 6541-433, Washer: .95 OD x .40 ID x .075 (replaced 6540 -368 8.31.20) 3. 6540-384, Nut: 3/8-16 Hex 4. 6541-000, O-Ring: .285"O.D. Replaces part number 6541-688 above 5. 6541-689, Nut: Compress Hex Dome  6541-647, Pin light with nut (limited stock) 6541-648, O-ring (limited stock) 6540-368, Washer: 0.9"O.D. x 0.4"I.D. x 0.075"(Silicone Rubber) (replaced by 6541-433)  6541-688, O-Ring: 5/16"O.D.  (replaced by 6541-000) 6560-558, Light: LED Quad 36"x 38"Daisy (2012+ J-280, J-275, J-270, J-245, J-235 Models Only)

Jacuzzi Brand Pillow for J-LX Collection. 2472-006 Replaces: 6455-485

Waterfall Returns J-LX, J-500, J-300, J-200, J-100 Series 6540-979, Drain: Gravity Drain with Cover 1-1/32"? 6540-682, O-Ring, 1.22" ID X 1 0.158" C/S (2 Req'd.) 6540-685, Nut, Accu- Pressure Jet Waterfalls (J-200/J-100 Series) 6540-925, Cover: Waterfall Gray (Plastic) 6000-530, Cover: Waterfall (Stainless Steel) 6540-921, Fill Spout: Waterfall (Clear Plastic) 6541-285, Gasket: Waterfall 6570-121, Washer: Split Lock, 5/16" Stainless Steel (2 Req'd.) 6570-120, Bolt: Hex 1/4-20 x 1", Stainless Steel (2 Req'd.) 2540-004, Adapter: 3/4" Slip x FPT 6540-262, Adapter: 3/4" Spigot x 3/4" Barb  

Air control valves are available for sale for the J-400 Series by Jacuzzi® Hot Tub. The air control valve is suitable for all hot tub models, but the part number will change depending on the model: individual air control components and their specifications are listed below: J-400 Air Components (2006+) Air Control Valve (All J-435, J-445, J-475, J-485, & 2020+ J-425, J-495) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control  Air Control Valve (All other J-400 Models) 20101-001, Knob: Air Valve 6540-377, Control: Air Body And Stem 6540-522, O-Ring: EPDM, 1.64" ID x 0.163" 6540-375, Manifold: Air Control Jacket 6540-376, Nut: Air Control 6000-179, Knob Stem 6000-016, Cup (Long) 6000-029, O-Ring  Filter/Skimmer Air Bleed Line 20216-001, Check Valve: 3/4" Air 6540-024, Adapter: 1/2" Spigot x 3/8" Barb 6570-491, Clamp: Metal Hose (Black) IX Jet Air Bleed Check Valve 20216-001, Check Valve: 3/4" Air 6540-065, Adapter: 1" Spigot x 3/4" Barb 6570-033, Clamp: 27mm J-400 Air Bleed Line (2009+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray J-500 Series Air Components (2015+) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control J-500 Air Bleed Line Fitting (2015+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray

2540-366, Jet Face: PowerPro LX w/316SS Escutcheon, 2007+ 6541-470, Jet Face: PowerPro LX w/o 316SS Escutcheon, 2007+6540-760, Jet Face: PowerPro LX, 2002-2006 6000-363, LX Jet Face Conversion Kit (Not Shown) 5-1/4" 6540-761, Jet Back: PowerPro LX, 2002+ 6541-472, Jet Back: Power Pro LX, 2007+ 6541-394, O-Ring: Triple 3.42 I.D 6540-763, Washer: Self Leveling PowerPro LX 6540-762, Nut: PowerPro LX, 2002+, 6541-471, Ring: PowerPro Jet Back Adapter (Adapts older 2006 Jet Backs 6540- 760 and 6540-761 above to accept current 2007+ Jet Faces 2540-366 and 6541-470).

Compatible with:  J-LX/LXL Series 2015-2019  J-315 2016+  J-325 2016+  J-355 2014+  J-345 2014+  J-355 2014+  J-365 2014+  J-375 2014+  J-385 2016+  J-415 2014-2019  J-425 2016-2019  J-435 2018+  J-445 2018+  J-465 2016-2017  J-470 2016-2018  J-475 2019+  J-480 2016-2018  J-485 2019+ J-495 2016+  J-575/585 2015+ 1a. 6541-170, Jet Face: Mini PowerPro FX-1 PC with Stainless Steel Escutcheon, 2015+ (Dark Gray)1b. 20285-001, Jet Face: Mini PowerPro FX with Stainless Steel Escutcheon (Light Gray - 2/2004 - 2014) 6540-555, Jet Face: Mini PowerPro FX without Stainless Steel Escutcheon (See Note) 6540-556, Jet Back: Mini PowerPro FX 6541-098, O-Ring: EDPM 1.98" I.D. x 0.163", Double 6540-639, Washer: Self Leveling Mini PowerPro FX 6540-557, Nut: Mini PowerPro FX, 2004+

Individual Circulation Pumps For J-300 Non-Convertible Spas (2002-2011)All J-280/J-270/J-230 Non-Convertible Spas with The Circ. Pump Option (2002-2011)   6000-125E (Laing) or 6000-125NA (Grundfos), Circulation Pump: E10, 240V 50/60Hz with Cord. This pump replaces retired 6000-125, 6500-035 pumps. 6500-460 (Laing)or 6500-460NA (Grundfos), Circulation Pump: E10, 120V with Chord. This pump replaced retired 6500-038 pump.     Note: The following parts are recommended when replacing a 6500-125 low-flow circulation pump. These products are also known as kit 6000-125RK (Grunfos pump + installation kit). They can be ordered as a kit or individually. Recommended quantities: 2x  27mm clamp (6570-033) 2x  #6 x 1" Flat Head Wood Screw (6570-100) 1x   3/4" Barb x Barb adapter (6541-075) 1x   3/4" Barb x Barb elbow (6540-228) 3x   3/4" Clear PVC Hose (sold by the foot for a total of 3') (6540-744)