J-300/J-200 Pump Replacement Parts (Prior to June 2009)
from $0.71
*Parts on this page may not be in stock and may be delayed for shipment
J-300/J-200 Fixed Bracket 48 Frame (60Hz) Pump Replacement Parts (Prior to June 2009)
6000-031, 2" Split nut6500-232, 2" Straight Union Assembly (includes 2" O-ring)6500-037, 2" 45° Union Assembly (includes 2" O-ring)6500-288, Front Housing for 2.5 hp (all years) and 2.0 hp (July 2003 - December 2009)6500-287, Font Housing for 2.0 hp (1999-June 2003) No longer available6540-171, 1/4-18 NSPM threadx 3/8"Barb, Stainless Steel Adapter (replaces 6540-030) Requires 1x 6540-171 O-ring (below)6540-263, O-ring (0.434" IDx 0.682" OD x 0.125" )6570-070, Self-tapping screw6500-255, Drain plug (1/4" NPSM)6500-256, Drain plug o-ring (0.47" ID x 0.103" )6500-290, Front Housing O-Ring6500-281, Seal (2.0hp 0.625" Shaft, PS200, 2002-June 2006) 6500-805, Seal (2.5hp 0.75" Shaft, PS201, all years) 6500-286, Rear bracket (2.0hp 1999-June 2003) No longer available6500-311, Rear bracket (2.0hp July 2003+, 2.5hp all years)Impellers6500-295, Impeller for 2.5hp (4.129" Diameter)6500-296, Impeller for 2.0hp (3.875" Diameter)6500-309, Impeller for 2.0hp (5.025" Diameter)6500-308, Impeller for 1.5hp (3.65" Diameter) No longer available
Compatibility:
6500-707 (2-Speed),
6500-753 (2-Speed),
6500-754 (2-Speed),
6500-758 (2-Speed),
6500-759 (2-Speed),
6500-761 (2-Speed),
6500-769 (1-Speed),
6500-763 (1-Speed)
North American 60Hz High-Flow Circulation Pumps
from $0.41
Compatible with
All J-LX & J-LXL Models (2011+)
All J-500 Models (2015+)
All J-400 models except J-415 (Jan 26, 2012+)
J-415 Models (October 2, 2013+)
J-385, J-375, J-365, J-355 Models (2012+)
J-345, J-335 Models (2012-8/11/15)
6500-907S, LX Pump: 240V 60Hz, 48 Frame, 3'Oclock (1.5" Unions); 13.7" overall length
Mounting Hardware (All Models) 6570-011, Insulator: 1" x 1.5" Rubber (4 Required)
6570-126, Nut: Hex 5/16-18 (4 Required)
6570-127, Washer, Split-Lock 5/16 (4 Required)
400 Series Skimmer Weir
from $20.95
Replacement floating skimmer weir.
Compatibility:
2006-2011: All J-400 Series Hot Tubs
2006-2012: J-480, J-470, J-465
6000-625, Skimmer: Weir Long
6540-845, Weir: Float J-400 (Attaches to Skimmer Weir)
2540-049, Basket: Skimmer J-400
6000-579, Vent Ring, Hi-Flow Cartridge Filter
20069-001, Long Canister: 23.5" with Nut (Fits J-480, J-470, And 5/07+ J-465 Models); Weir Purchased Separately Above
6541-189, Short Canister: 18.5" with Floating Weir And Nut (Fits J460 and 1/07- 4/07 J-465 Models)
Pillow Parts: J-300 (2016-2020+)
from $0.85
2016 - 2019
6455-486: Fastener J-300 Pillow with a plastic push-in screw (2 required)
2020+:
6540-543: Grommet (2 per pillow) and requires 6540-547
6540-547: Wingnut for grommet (2 per pillow) used with 6540-543
Also compatible with: J-445/J-435 (Oct 2017+), J-485/J-475 (2019+) and all J-400 (2020+)
Balboa Topside Controllers & Overlays
from $13.31
22074102, VL260 Large Balboa TopSide Controller (For One Pump Systems) (Measures roughly 7" wide) 4 Button22074112, Overlay for 22074102 (no longer available)
22074122, VL260 Generic Large Balboa Overlay for 22074102
22074101, VL200 Small Balboa Topside Controller (For One Pump Systems) (Measures roughly 4 3/8" x 1 5/8")22074111, VL200 Small Balboa Overlay for 22074101
22074114, VL401 Large Balboa Overlay (For One Pump System) - Rectangular
Compatible with Nordic Hot Tubs
J-300/J-200 North America 60Hz Bracketless
from $26.95
6500-341S Universal Bracket Mount, 1-Speed
6500-343S Universal Bracket Mount, 2-Speed
6000-031 Nut: Split Replacement 2"
6500-232 Union: Assembly 2" (Straight)
6500-037 Union: Assembly 2" (45°)
6000-645 O-Ring: 2"
6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel
6540-263 O-Ring, 0.434" ID x 0.682" OD x 0.125"
6500-546 Housing: Front
6500-548 Screw: Self-Tapping
6500-547 Plug: Drain And O-Ring
6500-545 O-Ring: Front Housing
6500-549 Impeller, 2.5hp6500-550 Impeller, 2.0hp6500-551 Impeller, 1.5hp
6500-543 Seal (Stationary) ASM-PS200
6500-544 Seal (Rotating) ASM-PS200
6500-540 Housing: Rear Bracket
6500-449 Start Capacitor, 240V
6500-448 Start Capacitor, 120
O-rings, Gaskets and O-ring/Gaskets
from $1.14
*This product is special order - please expect an additional delay receiving this part.
O-Ring: Black o-ring
Gasket: clear, flat gasket
O-ring/Gasket: Clear flat gasket with beveled o-ring edge
CoverMate Zero Parts
from $30.95
101987 - Shock (20 lbs)
101988 - Shock (30 lbs)
?102125 - ?Locking Shock (20 lbs)
102126 - Locking Shock (30 lbs)
101989 - Shock (40 lbs)
101795 - Shock lock tube
102002 - 3M Adhesive Glue for cover/lifter mounting
Jet Assemblies: PowerPro FXS Spinner Jet (10/2013+)
$39.95
Compatible with:
All J-300 Series 2014+
All J-400 Series 2014+
J-500 Series 2015+
6541-031, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon
6541-565, Jet Back: PowerPro FXS Spinner (O-Ring and Nut Included)
6541-624, Washer: (Self Leveling)
Jet Assemblies: Pulsator Jet (8/12/13+)
from $2.15
Compatible with :
J-465 2014-2015
J-480 2015
J-575, J-585 2015
1. 6541-561, Escutcheon: Pulsator Jet
2. 6541-562, Jet Face: Pulsator
3. 6541-287, Retainer: Pulsator (Replaces old style)
4. 6540-330, Nozzle: Pulsator Jet
5. 6540-338, Fitting: Wall Pulsator (Limited Stock)
6. 6660-002, O-Ring: EPDM, 0.859" I.D. x 0.139" C/S
7. 6540-274, Jet Back: Pulsator, Gray (Limited Stock)
8. 6540-061, 90° Elbow, 0.5" Slip x 0.75" Barb. Note: Used in J-480, J-465 2014+
Air Components: J-200 Series
from $2.19
J-200 Series Air Components (2005+)
Compatible Models:
J-275, J-245, J-235, J-210 (2012+)
J-270, J-280 (2007+)
J-230 (2008+)
J-225, J-215 (2017+)
2540-281, Control: Air with Knob
6541-284, Manifold: Air Control Jacket
6541-282, Nut: Air Control (Not Shown)
6541-283, Gasket: Air Control (Not Shown)
Diverter Valves: J-LX/J-LXL Series
from $6.13
J-LX & J-LXL Series (2011+)
2540-533, Knob: T-Valve JHT, 2007
6541-359, Knob: Side Valve, 2011
6540-729, Cap: T-Valve (Oval)
6540-876, Cap: T-Valve (Phoenix)
6540-865, O-Ring: Diverter Cap
6540-868, O-Ring: Diverter Stem, 0.591" I.D.
6540-550, O-Ring: Diverter Gate, 2.175 I.D.
6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately)
6541-969, Fitting: Wall Diverter
6540-511, O-Ring: 2.85" I.D. x 0.21" (2 Required)
6540-968, Nut: Diverter
6541-358, Body: Side
Jacuzzi Hot Tub Emblem, Peel-and-Stick
$5.00
Jacuzzi logo spa emblem. Peel-and-stick application. 3-1/2" x 1-1/2"